Network HB initially shown as error because it takes time for the status to be
read from xha by xapi. This adds a delay to allow the status to be updated
before XC displays it.
- Moved the top warning out of the filter toolstrip and into the same tableLayoutPanel
as the dataGridVew to avoid hardcoding the dataGridview location in the code.
- Corrected linkLabel colour for compliance. Changed icon to match the icon
of the bottom information label.
- When checking for updates disable the linklabel instead of hiding the whole
warning to avoid empty space or the dataGridView jumping up and down.
- The check button in the middle should be available when the check link is
available.
- Avoid toggling explicitly the enabled state of controls; it can be taken
care of within the check for updates event handlers.
- Other minor layout improvements (control positioning).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
thus solving the resizing issue of the Actions column. Also, register an action
before starting running it.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
General tab (Pool): In the list of updates, added a space after each comma
to let the control wrap the text into multiple lines. This way the text is
no longer cut, therefore no additional scrollbar is needed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changed the pre-check error message to refer to the absence of the Tools
when that is suspected to be the case.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- This is needed because this class is shared with the VNCControl solution which doesn't have access to the Helpers class
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
A bit of refactoring as requested by the reviewers
I decided not remove the NullReferenceExceptions and throw the Failures
immediately in order to avoid the additional error handling that seems to be unnecessary there. However, the reason I've decided to keep it as is is that it would change what gets logged and the performance gain would not be noticeable anyway. Furthermore, the current implementation (try-catchall) catches any other exceptions providing fallback to the default Failure.
Due to a regression (introduced by [1]), XenCenter will not run delayed actions in the correct host-order at all times. This can cause the master to be not the first host to be rebooted what may result in connections being lost to slaves should the API change between restarts/updates in a way that it would not be compatible to the previous version. This would make the wizard fail and users would have to restart their master host manually to make it connect to its slaves again.
This commit fixes the order of the hosts when executing the delayed actions.
[1]: 15827512e1
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- removed unused methods and properties from the NewPolicyWizard class
- made the wizard pages private in the NewPolicyWizard class
- removed unused constructor from the NewPolicySnapshotTypePage class
- removed unused property from the PolicyHistory class
- removed the public properties TreeView and DataGridView from the SnapshotsPage
- removed the PolicyType from the PolicyAlert class and the constructor that is no longer used
- removed unused property from the VMSS class
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink on the “Health Check Privacy Statement” window
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Fixed tab order
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Added Japanese privacy policy
* CA-205187 - L10n: JA/SC: The websites are not shown as hyperlink
Fixed regression in tab order
Detect both VM_LACKS_FEATURE and VM_LACKS_FEATURE_SUSPEND, show proper error message on the pre-check page in the Install Updates Wizard
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249849 - Using arrows to select license in license manager are the wrong way
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-249849 - Using arrows to select license in license manager are the wrong way round
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
* CA-249849 - Using arrows to select license in license manager
Reverted tab order for radiobutton groupbox as per review comments
In rare cases, the GetMaster could return null, causing the update progress to fail with "Pool_patch or Pool_update not found". (when the Cache hasn't been populated by the execution gets here)
This commit drops GetMaster and uses a pre-saved masterUuid instead of waiting for the Cache what would be the other way to solve this issue.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Moved "Legacy Windows" template to the bottom of the Windows templates
to discourage users from selecting it and avoid it being selected by default
at the top of the list as was the case.
Signed-off-by: Letsibogo Ramadi <letsibogo.ramadi@citrix.com>
Reset the PrecheckPage.PoolUpdate property on leaving the SelectPatch page, because it needs to be null for the Automated Updates mode and for the single update mode it will be updated on leaving the Upload page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Perform all the prechecks on applicable hosts only (i.e. the hosts that don't have the update applied already), with the following exceptions:
- The HA check, which is performed on the pool master
- The server-side precheck (PatchPrecheckCheck) which will still be performed on all servers in the pool and will show the warning if the update has already been applied on some servers
This commit also adds an override to the HAOffCheck.SuccessfulCheckDescription to show the pool name instead of the master's if the check is successful.
Also, in the PatchPrecheckCheck, I had moved the code that checks if the patch is already applied to the very beginning (before the host liveness check), so it will return the warning that the server will be skipped even if the server is not reachable
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
QEMU EXT_KEY_EVENT expects key symbol and key scan code to
be sent. This commit extends KeyEvent to supply translated key symbol,
as well as scan code.
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Fixed the format of the User-Agent to comply with [1].
[1] https://tools.ietf.org/html/rfc7231#section-5.5.3
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Changes following the code review
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Changes following the code review
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
* CA-249056: Add a unique ID to XenCenter Check For Update
Changes following the code review
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Also ensuring that if the UpdateSessionDisplaySettings function (which we use for resize) is not supported, then we display the console centered in the parent window and with scrollbars if needed
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- set managed=true, otherwise the network creation fails with the error "The network is not managed by xapi"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
