xenadmin/XenAdmin/Wizards/DRWizards/DRFailoverWizard.cs
Danilo Del Busso 4b0b83245f
CP-34231: Remove language with negative connotations (#2860)
* CA-34231: Replace negative language with `block list` in code and references

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `stop` in code and references

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `freezing` in code

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run/ran` in code comments

Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
#	XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
#	XenAdmin/Dialogs/Wlb/WorkloadReports.cs

* CA-34231: Replace negative language with `run` in Command.cs Run method

Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/TabPages/GeneralTabPage.cs

* CA-34231: Replace negative language with `run` in Command.cs CanRun method

Used Resharper rename utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method

Used ReSharper rename utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/DRConfigureCommand.cs
#	XenAdmin/Commands/DRDryrunCommand.cs
#	XenAdmin/Commands/DRFailbackCommand.cs
#	XenAdmin/Commands/DRFailoverCommand.cs
#	XenAdmin/Commands/DisasterRecoveryCommand.cs
#	XenAdmin/Commands/VMGroupCommand.cs

* CA-34231: Replace negative language with `run` in Command.cs RunCore method

Used ReSharper rename utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method

Used ReSharper rename utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `run` in Command.cs

Also applied to related symbols. Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in methods named CanRun

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/CrossPoolMigrateCommand.cs

* CA-34231: Replace negative language with `run` in remaining Run methods

Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `run` in Commands folder

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder

Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
#	XenAdmin/Dialogs/Wlb/WorkloadReports.cs
#	XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs

* CA-34231: Replace all remaining negative language with `run` in code

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/Controls/WlbRecommendations.cs
#	XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
#	XenModel/WLB/WlbScheduledTask.cs

* CA-34231: Replace negative language with `supporter` or `bond member` in code strings

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/MainWindow.cs
#	XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
#	XenModel/Messages.Designer.cs
#	XenModel/Messages.resx

* CA-34231: Replace remaining negative language with `supporter` in .resx files

Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.cs

* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in CFUValidator code

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	CFUValidator/CFUValidator.cs

* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method

Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
#	XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs

* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`

Used ReSharper renaming utility. Excluded jp and zh resources

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/EvacuateHostDialog.resx

* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`

Used ReSharper renaming utility. Excluded jp and zh resource files.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.resx

* CA-34231: Rename missing language references for change to `coordinator`

Misc files were not saved before last commits.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/HACommand.cs
#	XenAdmin/TabPages/AdPage.cs
#	XenModel/Actions/Network/CreateBondAction.cs
#	XenModel/Actions/Network/NetworkAction.cs
#	XenModel/Messages.Designer.cs
#	XenModel/Messages.resx

* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`

Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/AddHostToPoolCommand.cs
#	XenAdmin/Commands/HACommand.cs

* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.cs

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/AddHostToPoolCommand.cs

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.cs

* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/MainWindow.cs
#	XenAdmin/TabPages/GeneralTabPage.cs
#	XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
#	XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
#	XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
#	XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
#	XenAdmin/XenSearch/Columns.cs

* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenModel/Actions/Network/CreateBondAction.cs

* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenModel/Messages.Designer.cs
#	XenModel/Messages.resx

* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
#	XenModel/Messages.resx

* CA-34231: Rename dialogs to replace negative connotations with `main`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`

Also updated its resx file. Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs

* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Update class names in HelpManager.resx

Following renaming of main password dialog. Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `Metadata.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`

Used ReSharper renaming

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`

Used ReSharper

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language in solution

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Remove commented out code in VNCGraphicsClient.cs

Code has only been improved partially as it's not strictly relevant to the PR

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend negative word replacement in XSVNCScreen.cs

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Simplify debug call formatting in NewPoolDialog.cs

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Add code mistakenly removed in MainWindow.cs

Removed as part of `f155f9c8`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Revert renaming of constant related to Windows' API

Considered external to CH Center

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`

Previous ALT+<key> hotkey was conflicting with CreatePool

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs

Not relevant to the PR, but the change is small enought to no need extra testing

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend typo in PoolJoinRules.cs

supporer -> supporter

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`

Variables and methods XenAPI-Extensions were mistakenly skipped

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`

This is only used to format the string

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`

Done in order to fix merge conflict into master

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend misc negative language renaming typos

`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
2021-08-31 11:31:16 +01:00

473 lines
19 KiB
C#

/* Copyright (c) Citrix Systems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms,
* with or without modification, are permitted provided
* that the following conditions are met:
*
* * Redistributions of source code must retain the above
* copyright notice, this list of conditions and the
* following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the
* following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using XenAdmin.Actions;
using XenAdmin.Controls;
using XenAdmin.Core;
using XenAdmin.Wizards.GenericPages;
using XenAPI;
using XenAdmin.Actions.DR;
namespace XenAdmin.Wizards.DRWizards
{
public enum DRWizardType { Failover, Failback, Dryrun, Unknown }
public partial class DRFailoverWizard : XenWizardBase
{
private readonly RBACWarningPage RBACWarningPage;
private readonly DRFailoverWizardFirstPage DRFailoverWizardFirstPage;
private readonly DRFailoverWizardStoragePage DRFailoverWizardStoragePage1;
private readonly DRFailoverWizardPrecheckPage DRFailoverWizardPrecheckPage1;
private readonly DRFailoverWizardRecoverPage DRFailoverWizardRecoverPage1;
private readonly DRFailoverWizardAppliancesPage DRFailoverWizardAppliancesPage1;
private readonly DRFailoverWizardWelcomePage DRFailoverWizardWelcomePage;
private readonly DRFailoverWizardReportPage DRFailoverWizardReportPage1;
private readonly Pool Pool;
private DRWizardType WizardType;
private SummaryReport SummaryReport = new SummaryReport();
public DRFailoverWizard(Pool pool)
: this(pool, DRWizardType.Unknown)
{ }
public DRFailoverWizard(Pool pool, DRWizardType wizardType)
: base(pool.Connection)
{
InitializeComponent();
RBACWarningPage = new RBACWarningPage();
DRFailoverWizardFirstPage = new DRFailoverWizardFirstPage();
DRFailoverWizardStoragePage1 = new DRFailoverWizardStoragePage();
DRFailoverWizardPrecheckPage1 = new DRFailoverWizardPrecheckPage();
DRFailoverWizardRecoverPage1 = new DRFailoverWizardRecoverPage();
DRFailoverWizardAppliancesPage1 = new DRFailoverWizardAppliancesPage();
DRFailoverWizardWelcomePage = new DRFailoverWizardWelcomePage();
DRFailoverWizardReportPage1 = new DRFailoverWizardReportPage();
Pool = pool;
WizardType = wizardType;
#region RBAC Warning Page Checks
if (!Pool.Connection.Session.IsLocalSuperuser &&
Helpers.GetCoordinator(Pool.Connection).external_auth_type != Auth.AUTH_TYPE_NONE)
{
RBACWarningPage.WizardPermissionCheck check = new RBACWarningPage.WizardPermissionCheck(Messages.RBAC_DR_WIZARD_MESSAGE);
check.AddApiCheck("DR_task.async_create");
check.Blocking = true;
RBACWarningPage.AddPermissionChecks(xenConnection, check);
AddPage(RBACWarningPage, 0);
}
#endregion
DRFailoverWizardReportPage1.SummaryRetreiver = GetSummaryReport;
DRFailoverWizardWelcomePage.WizardTypeChanged += DRFailoverWizardWelcomePage_WizardTypeChanged;
DRFailoverWizardWelcomePage.SetWizardType(wizardType);
DRFailoverWizardRecoverPage1.ReportStarted += DRFailoverWizardRecoverPage1_ReportStarted;
DRFailoverWizardRecoverPage1.ReportLineGot += DRFailoverWizardRecoverPage1_ReportLineGot;
DRFailoverWizardRecoverPage1.ReportActionResultGot += DRFailoverWizardRecoverPage1_ReportActionResultGot;
DRFailoverWizardAppliancesPage1.Pool = pool;
DRFailoverWizardPrecheckPage1.Pool = pool;
DRFailoverWizardStoragePage1.NewDrTaskIntroduced += NewDrTaskIntroduced;
DRFailoverWizardPrecheckPage1.NewDrTaskIntroduced += NewDrTaskIntroduced;
DRFailoverWizardPrecheckPage1.SrIntroduced += DRFailoverWizardPrecheckPage1_SrIntroduced;
AddPages(DRFailoverWizardWelcomePage, DRFailoverWizardFirstPage, DRFailoverWizardStoragePage1, DRFailoverWizardAppliancesPage1,
DRFailoverWizardPrecheckPage1, DRFailoverWizardRecoverPage1, DRFailoverWizardReportPage1);
}
protected override string WizardPaneHelpID()
{
if (CurrentStepTabPage is RBACWarningPage)
{
string helpId;
switch (WizardType)
{
case DRWizardType.Failover:
helpId = "Failover_Rbac";
break;
case DRWizardType.Failback:
helpId = "Failback_Rbac";
break;
case DRWizardType.Dryrun:
helpId = "Dryrun_Rbac";
break;
default:
helpId = "Rbac";
break;
}
return FormatHelpId(helpId);
}
return base.WizardPaneHelpID();
}
protected override void UpdateWizardContent(XenTabPage senderPage)
{
var prevPageType = senderPage.GetType();
if (prevPageType == typeof(DRFailoverWizardStoragePage))
DRFailoverWizardAppliancesPage1.AllPoolMetadata = DRFailoverWizardStoragePage1.AllPoolMetadata;
else if (prevPageType == typeof(DRFailoverWizardAppliancesPage))
{
DRFailoverWizardRecoverPage1.StartActionAfterRecovery = DRFailoverWizardAppliancesPage1.StartActionAfterRecovery;
DRFailoverWizardPrecheckPage1.SelectedPoolMetadata = DRFailoverWizardAppliancesPage1.SelectedPoolMetadata;
DRFailoverWizardRecoverPage1.SelectedPoolMetadata = DRFailoverWizardAppliancesPage1.SelectedPoolMetadata;
}
else if (prevPageType == typeof(DRFailoverWizardRecoverPage))
DoFinalCleanup();
}
private List<DR_task> DrTasks = new List<DR_task>();
private List<XenRef<SR>> IntroducedSrs = new List<XenRef<SR>>();
private void NewDrTask(string opaqueRef)
{
DR_task drTask = DR_task.get_record(Pool.Connection.Session, opaqueRef);
drTask.opaque_ref = opaqueRef;
DrTasks.Add(drTask);
IntroducedSrs.AddRange(drTask.introduced_SRs);
}
private bool cleanupRan = false;
private void DoFinalCleanup()
{
if (cleanupRan)
return;
SummaryReport.AddLine("");
// destroy DR tasks
DestroyDrTasks();
// dry-run clean-up
if (WizardType == DRWizardType.Dryrun)
{
DoDryRunCleanup();
}
// revert pre-check resolved problems
if (DRFailoverWizardPrecheckPage1.RevertActions.Count > 0)
{
SummaryReport.AddLine(Messages.REVERT_PRECHECK_ACTIONS);
MultipleAction action = new MultipleAction(xenConnection, Messages.REVERT_PRECHECK_ACTIONS, "", "", DRFailoverWizardPrecheckPage1.RevertActions);
new Dialogs.ActionProgressDialog(action, ProgressBarStyle.Blocks).ShowDialog();
foreach (var subAction in DRFailoverWizardPrecheckPage1.RevertActions)
SummaryReport.AddActionResult(subAction);
}
cleanupRan = true;
}
private void DestroyDrTasks()
{
// destroy DR tasks
if (DrTasks.Count > 0)
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_DR_CLEANUP);
foreach (var drTask in DrTasks.ToList())
{
List<SR> srs = Pool.Connection.ResolveAll(drTask.introduced_SRs);
string srNames = string.Join(", ", (from sr in srs select sr.Name()).ToArray());
DR_task task = drTask;
var action = new DelegatedAsyncAction(xenConnection,
string.Format(Messages.ACTION_DR_TASK_DESTROY_TITLE, srNames) , Messages.ACTION_DR_TASK_DESTROY_STATUS, Messages.ACTION_DR_TASK_DESTROY_DONE,
s => DR_task.destroy(s, task.opaque_ref)) { Pool = this.Pool };
new Dialogs.ActionProgressDialog(action, ProgressBarStyle.Blocks).ShowDialog();
if (action.Succeeded)
DrTasks.Remove(drTask);
SummaryReport.AddActionResult(action);
}
}
private void DoDryRunCleanup()
{
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_DRYRUN_CLEANUP);
List<VM> recoveredVms = Pool.Connection.Cache.VMs.Where(vm => DRFailoverWizardRecoverPage1.RecoveredVmsUuids.Contains(vm.uuid)).ToList();
List<VM_appliance> recoveredAppliances = Pool.Connection.Cache.VM_appliances.Where(appliance => DRFailoverWizardRecoverPage1.RecoveredVmAppliancesUuids.Contains(appliance.uuid)).ToList();
// call hard_shutdown on the recovered VMs and delete the recovered VMs
if (recoveredVms.Count > 0)
ShutdownAndDestroyVMs(recoveredVms);
// call hard_shutdown on the recovered appliances and delete the recovered appliances
if (recoveredAppliances.Count > 0)
ShutdownAndDestroyAppliances(recoveredAppliances);
// detach and forget SRs
DetachAndForgetSRs();
}
private void ShutdownAndDestroyVMs(List<VM> recoveredVMs)
{
var action = new ShutdownAndDestroyVMsAction(Pool.Connection, recoveredVMs);
new Dialogs.ActionProgressDialog(action, ProgressBarStyle.Blocks).ShowDialog();
SummaryReport.AddActionResult(action);
}
private void ShutdownAndDestroyAppliances(List<VM_appliance> recoveredAppliances)
{
var action = new ShutdownAndDestroyVmAppliancesAction(Pool.Connection, recoveredAppliances);
new Dialogs.ActionProgressDialog(action, ProgressBarStyle.Blocks).ShowDialog();
SummaryReport.AddActionResult(action);
}
private void DetachAndForgetSRs()
{
if (IntroducedSrs.Count == 0)
return;
List<SR> srs = Pool.Connection.ResolveAll(IntroducedSrs);
List<AsyncAction> actions = new List<AsyncAction>();
foreach (SR sr in srs)
{
actions.Add(new SrAction(SrActionKind.Forget, sr));
}
if (actions.Count == 0)
return;
var action = new MultipleAction(Pool.Connection, Messages.ACTION_SRS_FORGETTING, Messages.FORGETTING_SRS, Messages.SRS_FORGOTTEN, actions);
new Dialogs.ActionProgressDialog(action, ProgressBarStyle.Blocks).ShowDialog();
foreach (var subAction in actions)
{
SummaryReport.AddActionResult(subAction);
}
}
private void StartSummaryReport()
{
// wizard type
SummaryReport.AddLine(Text);
// selected SRs
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_SELECTED_SRS);
foreach (var srName in DRFailoverWizardStoragePage1.GetSelectedSRsNames())
{
SummaryReport.AddLine(srName, 1);
}
// selected VMs and appliances
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_SELECTED_METADATA);
foreach (var poolMetadata in DRFailoverWizardAppliancesPage1.SelectedPoolMetadata.Values)
{
SummaryReport.AddLine(poolMetadata.Pool.Name(), 1);
foreach (var vmAppliance in poolMetadata.VmAppliances.Values)
{
SummaryReport.AddLine(vmAppliance.Name(), 2);
foreach (XenRef<VM> vmRef in vmAppliance.VMs)
{
if (poolMetadata.Vms.ContainsKey(vmRef))
{
SummaryReport.AddLine(poolMetadata.Vms[vmRef].Name(), 3);
}
}
}
foreach (var vm in poolMetadata.Vms.Values)
{
if (vm.IsAssignedToVapp())
continue;
SummaryReport.AddLine(vm.Name(), 2);
}
}
// power state after recovery
SummaryReport.AddLine(String.Format(Messages.DR_WIZARD_REPORT_SELECTED_POWER_STATE, DRFailoverWizardAppliancesPage1.GetSelectedPowerStateDescription()));
// introduced SRs
if (IntroducedSrs.Count > 0)
{
List<SR> srs = Pool.Connection.ResolveAll(IntroducedSrs);
string srNames = string.Join(", ", (from sr in srs select sr.Name()).ToArray());
SummaryReport.AddLine(string.Format(Messages.DR_WIZARD_REPORT_INTRODUCED_SRS, srNames));
}
else
{
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_INTRODUCED_SRS_NONE);
}
// Pre-check warnings
List<string> warnings = DRFailoverWizardPrecheckPage1.GetWarnings();
if (warnings.Count > 0)
{
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_PRECHECK_WARNINGS);
foreach (var warning in warnings)
SummaryReport.AddLine(warning, 1);
}
else
{
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_PRECHECK_WARNINGS_NONE);
}
SummaryReport.AddLine("");
SummaryReport.AddLine(Messages.DR_WIZARD_REPORT_RECOVERY_STARTED, 0, true);
}
private string GetSummaryReport()
{
return SummaryReport.ToString();
}
protected override void OnCancel(ref bool cancel)
{
base.OnCancel(ref cancel);
if (cancel)
return;
DoFinalCleanup();
}
#region Page event handlers
private void DRFailoverWizardWelcomePage_WizardTypeChanged(DRWizardType type)
{
WizardType = type;
switch (type)
{
case DRWizardType.Failover:
Text = string.Format(Messages.DR_WIZARD_FAILOVER_TITLE, xenConnection.Name);
pictureBoxWizard.Image = Images.StaticImages._000_Failover_h32bit_32;
break;
case DRWizardType.Failback:
Text = string.Format(Messages.DR_WIZARD_FAILBACK_TITLE, xenConnection.Name);
pictureBoxWizard.Image = Images.StaticImages._000_Failback_h32bit_32;
break;
case DRWizardType.Dryrun:
Text = string.Format(Messages.DR_WIZARD_DRYRUN_TITLE, xenConnection.Name);
pictureBoxWizard.Image = Images.StaticImages._000_TestFailover_h32bit_32;
break;
default:
pictureBoxWizard.Image = Images.StaticImages._000_DisasterRecovery_h32bit_32;
break;
}
DRFailoverWizardReportPage1.WizardType = WizardType;
DRFailoverWizardStoragePage1.WizardType = WizardType;
DRFailoverWizardAppliancesPage1.WizardType = WizardType;
DRFailoverWizardRecoverPage1.WizardType = WizardType;
DRFailoverWizardFirstPage.WizardType = WizardType;
DRFailoverWizardPrecheckPage1.WizardType = WizardType;
}
private void NewDrTaskIntroduced(string opaqueRef)
{
NewDrTask(opaqueRef);
}
private void DRFailoverWizardPrecheckPage1_SrIntroduced(XenRef<SR> srRef)
{
IntroducedSrs.Add(srRef);
}
private void DRFailoverWizardRecoverPage1_ReportStarted()
{
StartSummaryReport();
}
private void DRFailoverWizardRecoverPage1_ReportActionResultGot(AsyncAction action)
{
SummaryReport.AddActionResult(action);
}
private void DRFailoverWizardRecoverPage1_ReportLineGot(string text, int indent, bool timeStamp)
{
SummaryReport.AddLine(text, indent, timeStamp);
}
#endregion
}
public class SummaryReport
{
private StringBuilder report;
public SummaryReport()
{
report = new StringBuilder();
}
public void AddLine(string line, int indent, bool timeStamp)
{
const string space = " ";
const string bullet = "\u2022";
var indentText = "";
if (indent > 0)
{
// add space
for (var i = 0; i < indent; i++)
indentText = String.Format("{0}{1}", space, indentText);
// add bullet
indentText = String.Format("{0}{1} ", indentText, bullet);
}
report.AppendLine(timeStamp
? String.Format("{0} - {1}{2}", HelpersGUI.DateTimeToString(DateTime.Now, Messages.DATEFORMAT_DMY_HMS, true), indentText, line)
: String.Format("{0}{1}", indentText, line));
}
public void AddLine(string line, int indent)
{
AddLine(line, indent, false);
}
public void AddLine(string line)
{
AddLine(line, 0, false);
}
public void AddActionResult(AsyncAction action)
{
AddLine(action.Succeeded
? String.Format(Messages.DR_WIZARD_REPORT_ACTION_SUCCEEDED, action.Title)
: String.Format(Messages.DR_WIZARD_REPORT_ACTION_FAILED, action.Title, action.Exception.Message), 1);
}
public override string ToString()
{
return report.ToString();
}
}
}