xenadmin/XenAdmin/Commands/InstallToolsCommand.cs
Danilo Del Busso 4b0b83245f
CP-34231: Remove language with negative connotations (#2860)
* CA-34231: Replace negative language with `block list` in code and references

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `stop` in code and references

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `freezing` in code

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run/ran` in code comments

Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
#	XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
#	XenAdmin/Dialogs/Wlb/WorkloadReports.cs

* CA-34231: Replace negative language with `run` in Command.cs Run method

Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/TabPages/GeneralTabPage.cs

* CA-34231: Replace negative language with `run` in Command.cs CanRun method

Used Resharper rename utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method

Used ReSharper rename utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/DRConfigureCommand.cs
#	XenAdmin/Commands/DRDryrunCommand.cs
#	XenAdmin/Commands/DRFailbackCommand.cs
#	XenAdmin/Commands/DRFailoverCommand.cs
#	XenAdmin/Commands/DisasterRecoveryCommand.cs
#	XenAdmin/Commands/VMGroupCommand.cs

* CA-34231: Replace negative language with `run` in Command.cs RunCore method

Used ReSharper rename utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method

Used ReSharper rename utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `run` in Command.cs

Also applied to related symbols. Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in methods named CanRun

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/CrossPoolMigrateCommand.cs

* CA-34231: Replace negative language with `run` in remaining Run methods

Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `run` in Commands folder

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder

Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
#	XenAdmin/Dialogs/Wlb/WorkloadReports.cs
#	XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs

* CA-34231: Replace all remaining negative language with `run` in code

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/Controls/WlbRecommendations.cs
#	XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
#	XenModel/WLB/WlbScheduledTask.cs

* CA-34231: Replace negative language with `supporter` or `bond member` in code strings

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/MainWindow.cs
#	XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
#	XenModel/Messages.Designer.cs
#	XenModel/Messages.resx

* CA-34231: Replace remaining negative language with `supporter` in .resx files

Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.cs

* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in CFUValidator code

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	CFUValidator/CFUValidator.cs

* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method

Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
#	XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs

* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`

Used ReSharper renaming utility. Excluded jp and zh resources

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/EvacuateHostDialog.resx

* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`

Used ReSharper renaming utility. Excluded jp and zh resource files.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.resx

* CA-34231: Rename missing language references for change to `coordinator`

Misc files were not saved before last commits.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/HACommand.cs
#	XenAdmin/TabPages/AdPage.cs
#	XenModel/Actions/Network/CreateBondAction.cs
#	XenModel/Actions/Network/NetworkAction.cs
#	XenModel/Messages.Designer.cs
#	XenModel/Messages.resx

* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`

Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/AddHostToPoolCommand.cs
#	XenAdmin/Commands/HACommand.cs

* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.cs

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Commands/AddHostToPoolCommand.cs

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/NewPoolDialog.cs

* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/MainWindow.cs
#	XenAdmin/TabPages/GeneralTabPage.cs
#	XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
#	XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
#	XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
#	XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
#	XenAdmin/XenSearch/Columns.cs

* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenModel/Actions/Network/CreateBondAction.cs

* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenModel/Messages.Designer.cs
#	XenModel/Messages.resx

* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
#	XenModel/Messages.resx

* CA-34231: Rename dialogs to replace negative connotations with `main`

Used ReSharper renaming utility

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`

Also updated its resx file. Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

# Conflicts:
#	XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs

* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Update class names in HelpManager.resx

Following renaming of main password dialog. Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace negative language with `main` in `Metadata.cs`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`

Used ReSharper renaming

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`

Used ReSharper

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CA-34231: Replace remaining negative language in solution

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Remove commented out code in VNCGraphicsClient.cs

Code has only been improved partially as it's not strictly relevant to the PR

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend negative word replacement in XSVNCScreen.cs

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Simplify debug call formatting in NewPoolDialog.cs

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Add code mistakenly removed in MainWindow.cs

Removed as part of `f155f9c8`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Revert renaming of constant related to Windows' API

Considered external to CH Center

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`

Previous ALT+<key> hotkey was conflicting with CreatePool

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs

Not relevant to the PR, but the change is small enought to no need extra testing

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend typo in PoolJoinRules.cs

supporer -> supporter

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`

Variables and methods XenAPI-Extensions were mistakenly skipped

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`

Used ReSharper renaming utility.

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`

This is only used to format the string

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`

Done in order to fix merge conflict into master

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>

* CP-34231: Amend misc negative language renaming typos

`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`

Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
2021-08-31 11:31:16 +01:00

305 lines
12 KiB
C#

/* Copyright (c) Citrix Systems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms,
* with or without modification, are permitted provided
* that the following conditions are met:
*
* * Redistributions of source code must retain the above
* copyright notice, this list of conditions and the
* following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the
* following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
using System;
using System.Collections.Generic;
using XenAPI;
using XenAdmin.Actions;
using XenAdmin.Core;
using System.Windows.Forms;
using XenAdmin.Dialogs;
using System.Linq;
namespace XenAdmin.Commands
{
/// <summary>
/// Installs XenServer Tools on the selected VM.
/// </summary>
internal class InstallToolsCommand : Command
{
public event Action<AsyncAction> InstallTools;
/// <summary>
/// Initializes a new instance of this Command. The parameter-less constructor is required if
/// this Command is to be attached to a ToolStrip menu item or button. It should not be used in any other scenario.
/// </summary>
public InstallToolsCommand()
{
}
public InstallToolsCommand(IMainWindow mainWindow, IEnumerable<SelectedItem> selection)
: base(mainWindow, selection)
{
}
public InstallToolsCommand(IMainWindow mainWindow, IEnumerable<VM> vms)
: this(mainWindow, vms.Select(v => new SelectedItem(v)).ToList())
{
}
/// <summary>
/// Initializes a new instance of the <see cref="InstallToolsCommand"/> class.
/// </summary>
/// <param name="mainWindow">The main window.</param>
/// <param name="vm">The vm.</param>
/// <param name="parent">The parent window for any UI.</param>
public InstallToolsCommand(IMainWindow mainWindow, VM vm, Control parent)
: base(mainWindow, vm)
{
Parent = parent;
}
public InstallToolsCommand(IMainWindow mainWindow, VM vm)
: this(mainWindow, vm, null)
{
}
private void InstallToolsOnOneVm(VM vm)
{
if (vm.FindVMCDROM() == null)
{
DialogResult dialogResult;
using (var dlg = new NoIconDialog(string.Format(Messages.NEW_DVD_DRIVE_REQUIRED, BrandManager.VmTools),
ThreeButtonDialog.ButtonYes,
ThreeButtonDialog.ButtonNo))
{
dialogResult = dlg.ShowDialog(Parent);
}
if (dialogResult == DialogResult.Yes)
{
//do not register the event ShowUserInstruction; we show explicitly a message afterwards
var createDriveAction = new CreateCdDriveAction(vm);
using (var dlg = new ActionProgressDialog(createDriveAction, ProgressBarStyle.Marquee))
dlg.ShowDialog(Parent);
if (createDriveAction.Succeeded)
ShowMustRebootBox();
InstallTools?.Invoke(createDriveAction);
}
return;
}
using (var dlg = new WarningDialog(string.Format(Messages.XS_TOOLS_MESSAGE_ONE_VM,
BrandManager.BrandConsole, BrandManager.VmTools),
new ThreeButtonDialog.TBDButton(string.Format(Messages.INSTALL_XENSERVER_TOOLS_BUTTON, BrandManager.VmTools),
DialogResult.OK, ThreeButtonDialog.ButtonType.ACCEPT, true),
ThreeButtonDialog.ButtonCancel)
{
ShowLinkLabel = true,
LinkText = string.Format(Messages.INSTALLTOOLS_READ_MORE, BrandManager.VmTools),
LinkAction = () => Help.HelpManager.Launch("InstallToolsWarningDialog")
})
if (dlg.ShowDialog(Parent) == DialogResult.OK && CheckToolSrs(vm))
{
var installToolsAction = new InstallPVToolsAction(vm, Properties.Settings.Default.ShowHiddenVMs);
installToolsAction.Completed += InstallToolsActionCompleted;
installToolsAction.RunAsync();
InstallTools?.Invoke(installToolsAction);
}
}
private void InstallToolsOnManyVms(List<VM> vms)
{
bool newDvdDrivesRequired = false;
foreach (VM vm in vms)
{
if (CanRun(vm) && vm.FindVMCDROM() == null)
{
newDvdDrivesRequired = true;
break;
}
}
if (newDvdDrivesRequired)
{
DialogResult dialogResult;
using (var dlg = new WarningDialog(string.Format(Messages.NEW_DVD_DRIVES_REQUIRED, BrandManager.VmTools),
ThreeButtonDialog.ButtonYes, ThreeButtonDialog.ButtonNo))
{
dialogResult = dlg.ShowDialog(Parent);
}
if (dialogResult == DialogResult.Yes)
{
foreach (VM vm in vms)
{
if (CanRun(vm) && vm.FindVMCDROM() == null)
{
//do not register the event ShowUserInstruction; we show explicitly a message afterwards
var createDriveAction = new CreateCdDriveAction(vm);
using (var dlg = new ActionProgressDialog(createDriveAction, ProgressBarStyle.Marquee))
{
dlg.ShowDialog(Parent);
}
}
}
ShowMustRebootBox();
InstallTools?.Invoke(null);
}
}
else
{
using (var dlg = new WarningDialog(string.Format(Messages.XS_TOOLS_MESSAGE_MORE_THAN_ONE_VM, BrandManager.VmTools),
new ThreeButtonDialog.TBDButton(string.Format(Messages.INSTALL_XENSERVER_TOOLS_BUTTON, BrandManager.VmTools),
DialogResult.OK, ThreeButtonDialog.ButtonType.ACCEPT, true),
ThreeButtonDialog.ButtonCancel)
{
ShowLinkLabel = true,
LinkText = string.Format(Messages.INSTALLTOOLS_READ_MORE, BrandManager.VmTools),
LinkAction = () => Help.HelpManager.Launch("InstallToolsWarningDialog")
})
if (dlg.ShowDialog(Parent) == DialogResult.OK && CheckToolSrs(vms.ToArray()))
{
foreach (VM vm in vms)
{
var installToolsAction = new InstallPVToolsAction(vm, Properties.Settings.Default.ShowHiddenVMs);
if (vms.IndexOf(vm) == 0)
{
installToolsAction.Completed += FirstInstallToolsActionCompleted;
}
else
{
installToolsAction.Completed += InstallToolsActionCompleted;
}
installToolsAction.RunAsync();
}
InstallTools?.Invoke(null);
}
}
}
private bool CheckToolSrs(params VM[] vms)
{
// check all connections to make sure they don't have any broken SRs.
// If we find one tell the user we are going to fix it.
foreach (var vm in vms)
{
foreach (SR sr in vm.Connection.Cache.SRs)
{
if (sr.IsToolsSR() && sr.IsBroken())
{
using (var dlg = new WarningDialog(string.Format(Messages.BROKEN_TOOLS_PROMPT, BrandManager.BrandConsole),
ThreeButtonDialog.ButtonOK, ThreeButtonDialog.ButtonCancel)
{WindowTitle = string.Format(Messages.INSTALL_XENSERVER_TOOLS, BrandManager.VmTools)})
{
var dialogResult = dlg.ShowDialog(Parent);
return dialogResult == DialogResult.OK;
}
}
}
}
return true;
}
private void FirstInstallToolsActionCompleted(ActionBase sender)
{
InstallPVToolsAction action = (InstallPVToolsAction)sender;
MainWindowCommandInterface.Invoke(delegate
{
// Try to select the VM on which the PV tools are to be installed
if (MainWindowCommandInterface.SelectObjectInTree(action.VM))
{
// Switch to the VM's console tab
MainWindowCommandInterface.SwitchToTab(MainWindow.Tab.Console);
}
});
}
private void InstallToolsActionCompleted(ActionBase sender)
{
InstallPVToolsAction action = (InstallPVToolsAction)sender;
MainWindowCommandInterface.Invoke(delegate
{
Program.MainWindow.SelectObjectInTree(action.VM);
Program.MainWindow.TheTabControl.SelectedTab = Program.MainWindow.TabPageConsole;
});
}
private void ShowMustRebootBox()
{
if (!MainWindowCommandInterface.RunInAutomatedTestMode)
{
using (var dlg = new InformationDialog(string.Format(Messages.NEW_DVD_DRIVE_REBOOT_TOOLS, BrandManager.VmTools)))
dlg.ShowDialog(Parent);
}
}
protected override void RunCore(SelectedItemCollection selection)
{
List<VM> vms = selection.AsXenObjects<VM>(CanRun);
if (vms.Count == 1)
InstallToolsOnOneVm(vms[0]);
else
InstallToolsOnManyVms(vms);
}
public static bool CanRun(VM vm)
{
if (vm == null || vm.is_a_template || vm.Locked || vm.power_state != vm_power_state.Running)
return false;
var vStatus = vm.GetVirtualisationStatus(out _);
if (vStatus.HasFlag(VM.VirtualisationStatus.UNKNOWN) ||
vStatus.HasFlag(VM.VirtualisationStatus.IO_DRIVERS_INSTALLED) && vStatus.HasFlag(VM.VirtualisationStatus.MANAGEMENT_INSTALLED))
return false;
var vmHome = vm.Home();
if (vmHome != null && Helpers.IsOlderThanCoordinator(vmHome))
return false;
//whether RBAC allows connection to the VM's console
return vm.Connection.Session != null &&
Role.CanPerform(new RbacMethodList("http/connect_console"), vm.Connection, out _, false);
}
protected override bool CanRunCore(SelectedItemCollection selection)
{
return selection.Count > 0 &&
selection.All(v => v.XenObject is VM vm &&
!Helpers.StockholmOrGreater(vm.Connection) &&
CanRun(vm));
}
public override string MenuText => string.Format(Messages.MAINWINDOW_INSTALL_TOOLS, BrandManager.VmTools);
}
}