The change is supposed to provide additional flexibility for generating alert's
source link based on label values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Incorrect 301 redirects can be cached by user agents such as web browsers.
This can complicate recovery procedure after the incorrect redirect is fixed,
e.g. web browser cache must be reset.
The related issue - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1752
Allow configuring authorization params per list of targets
in vmalert's notifier config for `static_configs`.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2690
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
According to Ruler specification, only labels returned within time series
should be available for use in annotations.
For long time, vmalert didn't respect this rule. And in PR
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2403
this was fixed for the sake of compatibility. However, this resulted
into users confusion, as they expected all configured and extra labels
to be available - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3013
This fix allows to use extra labels in Annotations. But in the case of conflicts
the original labels (extracted from time series) are preferred.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/{httpserver,netutil}: allow to define min and max TLS version of the http server
* lib/httpserver: added descriptions about tls supported versions
* lib/netutil: check minimal tls version, added supported tls versions to error
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Clarify the description for -datasource.queryStep command-line flag
- Consistently use a single dash in front of -datasource.queryStep command-line flag
- Update -help output at docs/vmalert.md
- Consistently use single dash in front of command-line flags instead of double dashes.
- Add a warning that too small -search.latencyOffset may lead to incomplete query results.
Change default value for command-line flag `datasource.queryStep` from `0s` to `5m`.
Param `step` is added by vmalert to every rule evaluation request sent to datasource.
Before this change, `step` was equal to group's evaluation interval by default.
Param `step` for instant queries defines how far VM can look back for the last written data point.
The change supposed to improve reliability of the rules evaluation when evaluation interval
is lower than scraping interval.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Now vmalert will print the following messages on dupliсates:
```
"recording rule \"record\"; expr: \"up == 1\"; labels: summary={{ value|query }}" is a duplicate within the group "test"
"alerting rule \"alert\"; expr: \"up == 1\"; labels: description={{ value|query }}" is a duplicate within the group "test"
```
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3127
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: always re-evaluate Annotations
Previously, Annotations were evaluated only:
1. On alert creating.
2. On alert's value change.
This is premature optimization. It was assumed that since annotations
could contain only text with alert's labels or value - there is no need
in spending resources to re-compile Annotations.
Later, template function `query` was added, which can execute
arbitrary queries and return different results on every evaluation.
So if it was used in annotations, it would be executed only on init
or value change.
Another case when optimization caused an issue - annotations hot reload.
In this case, annotations of the active alert won't change even if Rule's
annotations were changed.
This fix enables Annotations re-evaluation on each iteration to resolve
issues above. It would have some impact on performance, but it is unlikely
it will be noticeable.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add tp Changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The change adds an example of `curl` command to the Rule's page.
The command is generated for each recorded state. It is supposed
user can just copy&execute the command to see what was returned
to vmalert.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
vmalert: add experimental feature of storing Rule's evaluation state
The new feature keeps last 20 state changes of each Rule
in memory. The state are available for view on the Rule's
view page. The page can be opened by clicking on `Details`
link next to Rule's name on the `/groups` page.
States change suppose to help in investigating cases when Rule
doesn't generate alerts or records.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The reason is to cover vulnerability GO-2022-0969
Found in: net/http@go1.18.5
Fixed in: net/http@go1.19.1
More info: https://pkg.go.dev/vuln/GO-2022-0969
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Rename logDebug() to logDebugf() and pass format string together
with format args directly to logDebugf(). This eliminates fmt.Sprintf()
overhead at logDebug() call site when debugging is disabled.
- Format labels in debug message in Prometheus format, e.g. {label1="value1",...labelN="valueN"}
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3025
* vmalert: add `debug` mode for alerting rules
Debug information includes alerts state changes and requests
sent to the datasource. Debug can be enabled only on rule's
level. It might be useful for debugging unexpected
behaviour of alerting rule.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3025
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fixes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmalert/alerting.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmalert: go fmt
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The io/ioutil package is deprecated since Go1.16 - see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics requires at least Go1.18, so it is time to remove the io/ioutil from source code
This is a follow-up for 02ca2342ab
ioutil.ReadAll is deprecated since Go1.16 - see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics requires at least Go1.18, so it is OK to switch from ioutil.ReadAll to io.ReadAll.
This is a follow-up for 02ca2342ab
The ioutil.{Read|Write}File is deprecated since Go1.16 -
see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics needs at least Go1.18, so it is safe to remove ioutil usage
from source code.
This is a follow-up for 02ca2342ab
We switch default alert's source link to redirect user
to vmalert's UI instead of previous JSON object. While it breaks
compatibility, it also supposed to improve user's experience.
The old behavior can be achieved by updating `-external.alert.source`
command-line flag.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Other components, such as `vmagent`, mark these flags as sensitive and
hide them from the `/metrics` endpoint by default. This commit adds
similar handling to the `vmalert` component, hiding them by default, to
prevent logging of secrets inappropriately.
Showing of these values is controlled by an additional flag.
Follow up to https://github.com/VictoriaMetrics/VictoriaMetrics/pull/2947
vmalert can be successfully used with datasources
compatible with Prometheus HTTP API. So we remove comments or
notes in Readme which are saying opposite.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmselect: cover special cases for vmalert's routing in single-node version
* remove trailing `/` from requests
* redirect to vmalert's home page when `/vmalert` is requested.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix review comments
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmselect/main.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmalert: deprecate alert's status link
Deprecate alert's status link `/api/v1/<groupID>/<alertID>/status` in favour of
`api/v1/alerts?group_id=<group_id>&alert_id=<alert_id>"`.
The change was needed for simplifying logic in vmselect for proxying vmalert's requests.
The old alert's status link will be still supported for a few versions but will be removed in the future.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix review comments
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* make all links in vmalert relative, so links continue to work even if vmalert sits behind the proxy;
* update vmalert's routing to always have component-unique path prefix, e.g. /vmalert;
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: remove head of line blocking for sending alerts
This change makes sending alerts to notifiers concurrent instead
of sequential. This eliminates head of line blocking, where first
faulty notifier address prevents the rest of notifiers from
receiving notifications.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: make default timeout for sending alerts 10s
Previous value of 1m was too high and was inconsistent
with default timeout defined for notifiers via
configuration file.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: linter checks fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
vmalert: support `limit` param in groups definition
`limit` param limits number of time series samples produced by a single rule
during execution.
On reaching the limit rule will return an err.
Signed-off-by: lihaowei <haoweili35@gmail.com>
- Remove unused js bloatware from /targets page. This strips down binary size by more than 100Kb
- Add /service-discovery page for API compatibility with Prometheus
- Properly load bootstrap.min.css from /prometheus/targets
- Serve static contents for /targets page from app/vminsert instead of app/vmselect, because /targets page is served from there
The new metric shows the configured evaluation interval per group.
Metric updates its value when group's interval is changed during
hot reload.
The new metric can be used to estimate how close group
is to start missing evaluation rounds. The following query
will show the % of used time by the group to evaluate all rules
before the next round:
```
(max(vmalert_iteration_duration_seconds{quantile="0.99"}) / vmalert_iteration_interval_seconds) * 100
```
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2618
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Unexpectedly, Grafana makes an extra request to `/rules`
handler in addition to `/api/v1/rules` calls in alerts UI.
This happens only for Grafana versions older than 8.5.*.
Apparently, this is related to support of other monitoring
systems.
Prometheus responds with `text/html` content for UI page `/rules`
to such requests. Actually, returning just a blank page with
SC=200 works as well.
Returning actual response of `/api/v1/rules`
results in error in Grafana since it expects a `yaml` (?) in response.
So we add a placeholder to `vmalert`.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2583
Signed-off-by: hagen1778 <roman@victoriametrics.com>
For liquid text processor double braces `{{` `}}`
are special chars for templating.
Since we use them in some of our docs with different purpose,
we must escape them to avoid syntax errors from liquid.
For escaping curly braces we use bult-in plugin which helps
to enclose sections of text via `{% raw %}` and `{% endraw %}`.
This approach prevents liquid syntax errors and makes render correct.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
