Also, fixed issue where uploading a supp-pack resulted in a perpetually
pending action if the file had disappeared from the disk.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
CA-320203: Fixed the update wizard failure when installing two cumulative updates
The issue was that when installing 2 new versions in one go (e.g. two cumulative updates), the installation succeeds on master but it cannot continue on slaves, because it cannot find the first CU update anymore.
The fix is to refresh the update record before applying the update, with the record found in the cache. Also, if there is no update in the cache, try to re-introduce the update.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Made storage selector blurb for XVA import a bit more informative.
- A simple checkbox for starting the new VMS on the finish page is adequate.
- Typos. Property modernisation.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
When running the XenCenter version precheck, calculate the higher server version that will be installed (by looking at the update sequence) and use this for checking the XenCenter version compatibility.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- if there is only one host in the selected pool, then preselect it.
- make sure that the Next button is enabled when a target host is selected.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-31063: Add support for multiple vGPU
(incomplete)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-31063: Add support for multiple vGPU
(part 2)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* AddVGPUDialog
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* Update bindings.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* REQ-720: Initial implementation of AddVgpuDialog.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* Improve the handling of buttons and combobox. Fix comments.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* Fix comments.
Signed-off-by: Michael Z <michael.zhao@citrix.com>
* CA-317856: Ensure that VMs are repatriated after all hotfixes are applied and the host has been rebooted.
- there is no need to remove the "reboot host" plan actions from the delayed actions list, because the action itself has code to check if a reboot is actually needed.
* CA-317856: Only add the "Exit maintenance mode" progress step if the host is in maintenance mode at that point.
- moved the AddProgressStep() call inside the function that checks if anything needs to be done (i.e. is host needs to be enables)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* Refactored the VIFDialog to fix various problems:
- Launch the dialog in using blocks.
- Event GotFocus is not meant to be handled directly in the code.
- Populate the dialog in the OnLoad override instead of the constructor
as this causes problems at design time.
- Popping up an error message for duplicate MAC on combobox item
selection or textbox text change is not optimal UX. Perform this
check once when closing the form. Additionally the parent form of the
pop up should be the dialog, not the main window.
- The validation messages are not obvious to the user because they are
hidden in the tooltip of a disabled button. Show them inline instead.
- There is no need to create commands for VIF creation/change; use
the relevant actions instead.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Corrections as per code review plus some more code tidy and refactoring.
- Added option to suppress Create/DeleteVIFActions
- Use property RebootRequired to indicate hot-plugging is unavailable
(assigning various objects of different types to the Result of the action
during its run may cause confusion).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- On the dialog show the next run time in both the client's and the server's local time zone.
- On the VMSS frequency page allow the user to pick the schedule in the client's
local time zone and show then next run time in both the client's and the server's local time zone.
- Refactoring to fix workflow and class design, reduce amount of code and simplify logic.
- Various layout improvements.
Signed-off-by: Aaron Robson aaron.robson@citrix.com
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- When asserting if a VM can be migrated to a pool we don't have to check all the hosts in the pool at this point, we can enable the pool when we find the first host where migration is possible; we will check the rest of the hosts only if that pool is selected.
- If the destination pool is older than the source, then we don't need to do any server calls because we know that migration to an older host is not allowed.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- hide the boot mode control if there is only one option (BIOS boot);
- add text "(experimental)" to the experimental options (in the radio button text);
- if an option is disabled, then hide the experimantal warning, as there is already a note saying why it is disabled;
- more detailed experimental warning.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If a host needs to be rebooted after the update application, and the update is not a live patch, then do the host evacuation before applying the update.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Thsi fixes the bug where XenCenter shows connection failure in the RPU when retrying an upgrade
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
of the hosts to be upgraded and not only on the first one in the list.
For this purpose, the test has been moved to the prechecks, and the
failures are now shown as a non-fixable problem.
Further, specification of the network location of the installer files
has moved closer to the upgrade mode selection.
Also, moved the hotfix and upgrade related checks immediately after the
host liveness check.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Moved these errors to the FriendlyNames, which is reserved for resources with
keys coming verbatim from the server.
Some code efficiency corrections to the page's workflow.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
because it only manages friendly names; moved it closer to the relevant resource files.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-30335: Fix RPU wizard tests
* CP-30335: Add abstract class WarningWithMoreInfo and use it for two of the existing Warnings
* CP-30335: Add a new precheck which produces a warning if the Dom0 memory after the upgrade will be increased.
- if the Dom0 memory after the upgrade is known, then a warning is shown if this is higher than the current memory, regardless of the version of the upgrade
- if the Dom0 memory after the upgrade is not known (e.g. because the rpu plugin does not have the function that returns this), then a warning is shown if upgrading from a pre-Naples version
* CP-30335: Add a more detailed error message if the host evacuation fails due to not enough memory in the RPU and Patching wizards
* CP-30335: Add branding variable for version 8.0
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Moved Install Location (RollingUpgradeWizard_SelectInstallMethod) page immediatelly after the Upgrade Mode page (and before the Prechecks page)
- Added a new page, called Extras, which contains the updates and supp pack installation options. These options have been moved here from the "Upgrade Mode" and "Ready To Upgrade" pages. This page is also inserted before the Prechecks
- There is no "Ready To Upgrade" page anymore. So the wizard pages are:
- when automatic mode is selected: Before You Start, Select Pools, Upgrade Mode, Installer Location, Extras, Prechecks, Apply Upgrade.
- when manual mode is selected: Before You Start, Select Pools, Upgrade Mode, Extras, Prechecks, Apply Upgrade.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
or upgrade process (either when cancelling the wizard itself or when exiting
the application). Rephrased confirmation message for clarity.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
(either when cancelling the wizard itself or exiting the application).
Implemented in the first instance for compiling the server status report.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- removal of the SystemStatusAction launching the individual SingleHostStatusActions,
because the connection was set incorrectly to the last one of the selected
connections and, if an error occurred to that connection, the data collection
for all of them failed.
- proper handling of HTTP.CancelledExceptions.
- replacement of the FlickerFreeListBox by the more versatile DataGridViewEx.
- corrections to reporting progress for individual hosts as well as page totals.
- made collection of client side data more obvious.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
set by the caller. Test corrections so they don't time out due to blocking
open dialogs. Some tidying up.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Since we support checkpoint of Nvidia VGPU dedicated VMs, the conditions
text when new a VMSS needs to be refined.Note that Intel and AMD dedicated
GPUs VMs still be blocked for checkpoint.
Signed-off-by: Min Li <min.li1@citrix.com>
* Simplification: use auto-properties.
* Removed unnecessary null check. Converted private methods to linq method chain.
* Removed unused file. Added null check.
* Corrected property names as it was difficult to distinguish between the alert,
the patch and the filepath.
* Removed duplicate lock.
* CA-296490: Rewrote the logic uploading single updates so as to facilitate uploading to multiple pools in parallel.
* Corrections as per code review.
* Account for the case of uploading from disk legacy updates that do not correspond to an update alert.
Removed unfriendly error messages (the failure is written out in the logs anyway).
* Wizard test corrections and some modernising:
- Only call cancel on the last page if the test allows us to.
- Do finish the UpdatesWizard test.
- Finish the RunWizardKeyboardTests using key strokes instead of button clicks.
- Ensure the Cancel/Previous buttons do not have focus when sending an Enter stroke.
- Use optional parameters in the WizardTest constructor and string interpolation.
* Renamed badly named property.
* Improved code cloning VMs by assigning new opaque_refs to cloned VBDs.
Compacted test object provider: use optional parameters instead of method overloads.
* Modifications to prevent multiple update of enabled state and ensure the wizard
buttons are updated last.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Use two separate feature flags, `guefi` and `guefi-secureboot`, with the following rules:
- If the feature is disabled, then the option is hidden in XenCenter.
- If the feature is enabled and experimental, then the option is visible and a warning is displayed in XenCenter (in the New Vm and Import wizards).
Also show the reason why a boot mode option is greyed out (when the uefi/uefi-secure boot mode is not supported in the selected template).
(On the Page_InstallationMedia control, I moved the BootModeContol and PvBootBox controls inside the TableLayoutPanel, to allow better alignment and for better visibility in the design mode)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the New VM wizard, the boot mode control is only visible for Naples or greater hosts
- In the Import wizard, I had moved the boot mode options to a separate page, added after the target selection page, to allow the version check. The new "Boot options" page is only added for Naples or greater hosts.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-29856: Support minimum number of vCPUs in guest templates
- Show a warning if the user wants to set a smaller number of vCPUs than the minimum specified in the template
- Add a null check; Set the warning label text before making it visible to avoid flickering.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
If, for example, the host was disconnected, poolUpdateFromHost was null,
which was causing a silent exception resulting to an empty precheck list
shown on the page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
If the update sequence for automated updates contains an update which requires a host reboot and a hotfix with an immediate toolstack restart (after-apply-guidance=restartXAPI and guidance-mandatory=true),
then XenCenter should do an immediate host reboot after applying the hotfix that required the immediate toolstack restart (as doing a toolstack restart when a host reboot is required is potentially risky)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-300384: XC unable to create (GFS2) VDI of virtual-size larger than available storage when creating new VM.
Calling SR.VdiCreationCanProceed on the total space required of each SR as it takes into account that Thinly Provisioned SRs may overprovision in the same way that the NewDiskDialog does by effectively ignoring the free space limit.
IsSufficientFreeSpaceAvailableOnSrForVdi was not taking into account Thin Provisioning when checking if the virtual disk would fit on the SR and as a consequence would attempt to find another SR to place it on silently; either choosing "Local Storage" or "<no suitable storage>" depending on the size requested relative to the SR sizes.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
* CA-300384: Hooking into the warning mechanism of the storage grid to ensure that the user is aware that over-provisioning is occurring, but not block them from continuing.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
- with this change the user won't see the misleading "Moving VM to new storage" in History if they tried to move the VM inside the pool, but actually didn't select different SRs for the VM's disks.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- if a VM can migrate inside a pool, then we will allow it in the wizard, even if storage migration is not allowed
- If it is a intra-pool migration (without moving the disks), then use the VM migrate action (which does a VM.pool_migrate), not the cross pool migrate action.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
lost when leaving and returning back to the SelectServers page.
Also, the list of SelectedServers does not need to be re-evaluated every time
it is accessed but rather once when we move away from the page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-272847: Compilation time is way overestimated (when creating a server status report).
- As the times are made up of server timeouts they overestimate quite significantly, we are removing the time estimates from the screen.
- Do not mention being able to see the time that has been removed inside the explanatory label.
- Removing further unused Util functions LThanTime and GThanTime.
- Redone the layout with the privacy link on a separate row to avoid wrapping at smaller sizes and to even up the layout of the Select/Clear buttons with the Total Size label.
- Fixed the tab indexes and removed the invisible Split Container.
- Adjusted the blurb margins to our default and set the last row with the privacy link to be AutoSize rather than absolute in case of truncation in other languages.
Signed-off-by: Aaron Robson <aaron.robson@citrix.com>
When XenCenter checks if a VM can be storage-migrated (including in the same pool), it only checks if migration is possible to one SR (the first SR from the SR list that supports vdi creation), which could be a GFS2 SR, where migration is not supported. With this fix, we will only consider the SRs which support migration (instead of vdi creation).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-301156: VM created from disk import for a UEFI VM has missing values
Set default params when importing VHD
Signed-off-by: Tim Liu <tim.liu@citrix.com>
Also, simplified the logic selecting the single update when we leave the
SelectPatchPage so as to avoid ambiguities in which properties are to be set
and refactored the error handling methods to avoid duplicate checks and
provide the right error message (for example, the error message was misleading
for a non-existent path; or, the level of detail provided in the case of
invalid zip content was of lesser relevance to the user).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
legacy patch and then went back to select and install an update.
The code was removing all the uploaded legacy patches except the installed
ones. In this case the installed legacy patch is null hence all the already
uploaded patches need to be removed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-29768: Add Skip functionality for RPU supp pack installation
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
* Minor corrections
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* Revert unnecessary layout changes
Also changed the title of the confirmation dialog to the wizard title, as it could be shown in either RPU or the Patching wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
the Prechecks page, then back to select a single iso update, and forwards again
to the Prechecks page. The cause was that the values of Patch and PoolUpdate
were not always propagated from the Upload page to the following pages, hence
on that occasion they were both non-null, while the logic of the following
pages expects only one of the two to be non-null.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
One of the PatchGridViewRow constructors was obsoleted, hence the _image and
_status cells and the row's PathPatch were always null. When a user selected a
patch, moved to the Prechecks page, back to the Select page, and the host got
disconnected, on moving to the SelectServers page and closing the warning pop-up,
XenCenter crashed because it was trying to update details of null cells. Also,
removed obsoleted toggling expanded state functionality.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
hidden and in all other cases it was set by the implementing control, i.e.
the label was not reusable, hence no reason to have it in the control and risk
layout issues. This means that the SrPicker does not need to be a control
encapsulating a CustomTreeVIew, but simply derive from the latter.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This PR is aimimg to (1) fix a regression introduced by #2223 whereby the toolbar items did not have the correct state on first launch; (2) improve performance by removing some updates which I believe are not needed.
* Removed some duplicate calls to RefershTreeView and UpdateToolbars because
they are called within the action's Complete event handler.
Also, normalise the way the treeview refresh is requested by the various actions the
commands are launching.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Removed some explicit calls to refresh the treeview since this is done by
the connection result handlers.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* The toolbars and tabs should be updated every time the treeview is refreshed.
This should happen when the refresh event is handled rather than calling
UpdateToolbars explicitly after a treeview refresh is requested; also, it is
the treeview refreshes that should be throttled and not the toolbar and
tab updates (the throttling mechanism may need correction).
Also, removed unnecessary Invoke as we are already on the UI thread.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Simplified UpdateManager.Update event declaration.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
With this change, following are working:
1) After applying XS75E003-5 only restart host, no restart toolstack
2) After applying vGPU driver on 7.4, restart host happens
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
the spinner with the surrounding controls on a parent control/form.
Also, removed the icon from the spinner because in the
majority of implementations it was invisible and the extra space was just
complicating the alignment of the surrounding controls.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-297020: Do not download imported appliance on a modal dialog, but rather
asynchronously on the ImportSourcePage, so that the rest of XenCenter is usable
while the download is taking place; used the page's progress bar for this purpose
and removed the DownloadApplianceDialog.
* Corrections to the validation of the import source.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-294333: NewPolicySnapshotPage corrections.
- Fixed layout and accessibility of controls.
- Changed clickable info icons to normal icon+text info panels because they
are used more widely across XenCenter and the user does not need extra clicks
to access the information.
- Fixed bug where two clicks were required to check the quiescing checkbox
if the Disk and Memory radio was selected.
* Minor layout correction.
* Removed some obsolete code.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
having preselected a connection on the treeview. Also added a null check to
prevent crash if the connection is suddenly interrupted while moving away
from the select destination host page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-28679: XC: Allow choosing boot options during disk import
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* CP-28679: XC: Allow choosing boot options during disk import
1. Keep spaces instead of tabs
2. Update page header text to reflect the new control
3. Refine UI
Signed-off-by: Tim Liu <tim.liu@citrix.com>
1. Update the duplicated shortcuts on CPU&Mem Page
2. Default radio boxes invisible
3. Move hardcoded logic to VM.cs
4. BIOS boot should be always enabled
5. Move radio boxes to Installation Media page
6. Extract radio boxes as a user control
7. Update summary
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* CA-293776: The order in which a single update is applied on the slaves is not the same as the order in which they are displayed
Apply the same Hosts sorting rules for all the PatchingWizard Pages .
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* CA-293776: The order in which a single update is applied on the slaves is not the same as the order in which they are displayed
Place orderby clause after where clause
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* CA-293813: Patch pools in parallel when installing a single update/patch or supplemental package.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Corrections as per code review.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
setting controls. Also removed the various types of ballooning dialogs since
the only thing changing was the contained memory settings control.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
asynchronously on the SelectImportSourcePage, so that the rest of XenCenter
is usable while the unzip is taking place; for this purpose a progress bar
was added on the page and the DecompressApplianceDialog was removed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
is not agile simply by hovering over the cell. Previously the user could see
this only if they selected the VM, expanded the restart priority dropdown
and hovered over the Restart item.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
launches a dialog requiring user input, but added it to fcToolStripMenuItem
too because it looks symmetric and in any case the user does have to close
an error pop-up if the scan fails). Also, do not show "no SRs found pop-up"
if the user cancels the IscsiDeviceConfigDialog.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-292626: Consider the contains-livepatch flag of all the applicable updates when doing the prechecks in the automated updates mode.
Instead of looking at the minimal patches, we look at all applicable patches for that host (i.e. all the updates on the host's version that are not already installed) and we say that the host won't need a reboot only if all these are marked as contains-livepatch.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CA-293854: Patching wizard updates list loses selection and resizes columns when resorted
Remove the redundant code
Change the AutoSize mode from DisplayedCells to AllCells.
Fix the date column sorting
Disable column header AutoSizing
Signed-off-by: Tim Liu <tim.liu@citrix.com>
* L10N: CA-294292 Fixed truncation issue in language files.
* L10N: CA-294333 Fixed overlapping issue in Japanese file.
* L10N: CA-294333 Fixed overlapping issue in Japanese file.
Signed-off-by: Darren Matthews <darren.matthews@citrix.com>
* CA-284914: Prechecks are re-run every time the 'Hide successful prechecks' is ticked/unticked
Signed-off-by: Jisheng Xing <jisheng.xing@citrix.com>
* fix some comments
or Host accordingly. Extended comparison of Problems to also take account of
the XenObject the Check was performed on, otherwise the Problems get mixed
up when there are homonymous members across pools.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
minimum required role. Do not deselect a pool on the RPU wizard if it fails
the RBAC check; let the user decide either to reconnect with more privileges
or deselect it.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
(to ensure that XC has the latest c-f-u data, as it's possible that the user hasn't configured XenCenter to automatically check for updates)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
... because pre-Dundee hosts dont't have this license flag, but they might have it after the upgrade.
Also added a bit more logging in the function that generates the update plan actions
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-28431: Block updates and upgrades from Kolkata onwards if clustering enabled
* CP-28431: Rename files and change from Pool Check to [Host] Check
* CP-28431: Change description message
Signed-off-by: Seren Corbett <seren.corbett@citrix.com>
on the update mode, so that the right set of hosts is passed on to the prechecks
page for partially upgraded pools that are to be updated to a new version with
hotfixes. Also, corrected code that was mixing the logic of changing the enabled
state of a row with the checked state.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
the liveness warning is not issued if the pool is disconnected. HAOffCheck tidy up.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also sort Messages.resx and call ReplaceProgressStep instead of AddProgressStep in the DownloadPatchPlanAction class (when the download is skipped)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
a new check on the existing one instead. Moved the background worker to the designer
of the class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
reverted to the new class UpdateUpgradeWizard which serves as base for the
Patching and the RPU wizards. Pass the list of resolved problems to the
automated updates page and not the actions, so as to prevent premature (i.e.
on creation as opposed to on start) addition to the global list shown on
the Events page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
is now in one place, namely the PatchingWizard_PrecheckPage.UnwindChangesActions.
The pages following this page use now this list instead of the problems
encountered, so we ensure that the update/upgrade plans do not include the
unwind action if no resolution of problems took place on the prechecks page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
are set unless the new value is actually different. Small efficiency improvements
to the DownloadPatch action and plan action.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
a message in this case as the SRs are reconnected after reboot and this may lead
to duplicate messages. Also, simplified check-and-plug methods for PBDs to avoid
repetition of iterations.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Deprecate set but unused Status property in favour of ProgressDescription.
* Deprecate set but unused TitlePlan property.
* Deprecated property Title in favour of ProgressDescription.
* Removed unused plan RebootHostPlanAction.
* Updated event declaration.
* Removed property Visible. The plan is to have the actions log their history as soon as some is available.
* Reworked the logging for the plan actions. The main change is the replacement of
the ProgressDescription with a stack where all the steps of an action are stored,
i.e. the action is responsible for its history, not the worker running it.
* Lock the progress history before accessing it.
* Better handling of error logging and user cancellation.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1) Always pool level selection of hosts, except uploading sup pack file
from disk.
2) Revert homogeneity precheck change recently. It won't happen in new version
update any more.
3) User can never update slaves to a higher version than master, so delete
master_version_not_compatible_problem.
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
- In the RPU case, re-enable the host after the upgrade is done, as the host will be put back into maintenance mode when needed during the update process.
- The VMs should not be repatriated during the RPU
- When a host is rebooted, it needs to be disabled first (even if an evacuation is not needed), otherwise the reboot won't happen
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Renamed HostPlanActions class to HostPlan to avoid confusion with the HostPlanAction class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Also corrected the function that creates the update plan action in RPU: when running a retry, these actions shouldn't be regenerated.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Some methods have been moved/added to the base class to facilitate the calculation of the plan actions in the RPU case.
- Also fixed the calculation of the progress bar value.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The base class contains all the code for creating and starting the background workers, displaying the progress of the actions, handling failures and retries.
The derived classes override the property for label at the top of the page and the method that generates the plan actions.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- ensure that an action is only added once to the DoneActions and InProgressActions
- reset the wizard buttons (Cancel, Finish) when a retry is started
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
* CP-28286: Support resume from a partially upgraded pool via Update wizard
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
* CP-28286: Fix comments of the previous commit
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
