Also, no need to use a different message for single and multiple VMs or templates.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-34231: Replace negative language with `block list` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `stop` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `freezing` in code
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run/ran` in code comments
Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
* CA-34231: Replace negative language with `run` in Command.cs Run method
Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/TabPages/GeneralTabPage.cs
* CA-34231: Replace negative language with `run` in Command.cs CanRun method
Used Resharper rename utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/DRConfigureCommand.cs
# XenAdmin/Commands/DRDryrunCommand.cs
# XenAdmin/Commands/DRFailbackCommand.cs
# XenAdmin/Commands/DRFailoverCommand.cs
# XenAdmin/Commands/DisasterRecoveryCommand.cs
# XenAdmin/Commands/VMGroupCommand.cs
* CA-34231: Replace negative language with `run` in Command.cs RunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Command.cs
Also applied to related symbols. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods named CanRun
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/CrossPoolMigrateCommand.cs
* CA-34231: Replace negative language with `run` in remaining Run methods
Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Commands folder
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder
Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
* CA-34231: Replace all remaining negative language with `run` in code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/Controls/WlbRecommendations.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
# XenModel/WLB/WlbScheduledTask.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in code strings
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative language with `supporter` in .resx files
Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in CFUValidator code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CFUValidator.cs
* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method
Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
# XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resources
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/EvacuateHostDialog.resx
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resource files.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.resx
* CA-34231: Rename missing language references for change to `coordinator`
Misc files were not saved before last commits.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/HACommand.cs
# XenAdmin/TabPages/AdPage.cs
# XenModel/Actions/Network/CreateBondAction.cs
# XenModel/Actions/Network/NetworkAction.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`
Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
# XenAdmin/Commands/HACommand.cs
* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/TabPages/GeneralTabPage.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
# XenAdmin/XenSearch/Columns.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Actions/Network/CreateBondAction.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
# XenModel/Messages.resx
* CA-34231: Rename dialogs to replace negative connotations with `main`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`
Also updated its resx file. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Update class names in HelpManager.resx
Following renaming of main password dialog. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `Metadata.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`
Used ReSharper renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`
Used ReSharper
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language in solution
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove commented out code in VNCGraphicsClient.cs
Code has only been improved partially as it's not strictly relevant to the PR
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend negative word replacement in XSVNCScreen.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Simplify debug call formatting in NewPoolDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Add code mistakenly removed in MainWindow.cs
Removed as part of `f155f9c8`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Revert renaming of constant related to Windows' API
Considered external to CH Center
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`
Previous ALT+<key> hotkey was conflicting with CreatePool
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs
Not relevant to the PR, but the change is small enought to no need extra testing
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend typo in PoolJoinRules.cs
supporer -> supporter
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`
Variables and methods XenAPI-Extensions were mistakenly skipped
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`
This is only used to format the string
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`
Done in order to fix merge conflict into master
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend misc negative language renaming typos
`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Hide GPU page if the host has no GPU capability
* Hid GPU page in PropertiesDialog
* Hid GPU page in NewVMWizard
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Move GPU availability check to Helpers class
* Switch from field to method based check
* Update affected logic
* Remove rubric toggle in PopulatePage when GpuEditPage is shown
* Hide AddVGPUDialog when GpusAvailable returns false
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Remove missing GPUs strings in Messages.resx
* GPU_RUBRIC_NO_GPUS_POOL
* GPU_RUBRIC_NO_GPUS_SERVER
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Disable combobox in AddVGPUDialog when there are no GPUs
Avoids exception being thrown if user tries to select empty first item
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Amend position of GPU availability check
Moved since gpuCapability is used in the Finish method of the wizard
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Remove unecessary null checks in Helpers method
The Cache and its properties (e.g. GPU_groups) are readonly and initialised as empty.
The API object properties that are ref lists (g.PGPUs, g.supported_VGPU_types) are also initialised as empty and are demarshalled by the SDK as empty if they have no values.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34935 ConnectionOptions invalid tooltip now dissappears when page changes or when the dialog moves
Signed-off-by: Christopher Lancaster <christopher.lancaste1@citrix.com>
* CA-349435 modified IOptionsPage & IEditPage to include a Hide Tooltip method, implemented it in all relevant classes. Hooked up events in the options dialog & properties dialog to hide tooltips on tab change or dialog move
Signed-off-by: Christopher Lancaster <christopher.lancaste1@citrix.com>
* CA-349435 removed duplicate pages that were added accidently/automatically
Signed-off-by: Christopher Lancaster <christopher.lancaste1@citrix.com>
* CA-339590: Add conditional page control refresh in HA Wizard
* CA-339590: Remove remaining HA Wizard page control reloads
Removed PopulatePageControls method and used PopulatePage override instead.
Removed IsDirty implementation from AssignPriorities.
* CA-339590: Remove useless calls to IsDirty in AssignPriorities
Call did not serve any purposes after previous switch to PopulatePage method
* CA-339590: Remove `IsFirstLoad` check for SR scan in HAWizard
Check was not necessary for CA-339590
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* DataSet field Uuid is not really a uuid. Renamed to Id to avoid misunderstandings.
* Renamed properties DataSet.Type and DataSourceItem.DataType to Category. The old name was not reflecting what they were.
* Renamed property DataSet.TypeString to DataSet.DataSourceName so it reflects better what it is.
* Renamed property DataSet.Name to DataSet.FriendlyName for clarity. Removed duplicate string.Format() call.
* The DataSourceItem.Uuid is not really a uuid. Renamed it to Id to avoid misunderstandings. Also, compacted DataSourceItem constructors.
* Removed unused and duplicate properties.
- DataKey.Hide was unused. Once removed, DataSet.Deselected was unused, hence was also removed.
- Dataset.Draw was duplicating DataSet.Show, hence was removed.
- DataSet.NeverShow is not necessary, DataSet.Hide can be used both for datasources
that should not be shown at all as well as datasources that are wrong for this object.
* Made DataSet.FriendlyName a get-only property and compacted repetitive code.
* Use the Helpers regular expressions for assigning the datasource category.
* Removed id from the DataSet constructor parameters. It can be constructed from the XenObject and the datasource name.
* Compacted the code for readability (it was difficult to follow the build of the URIs).
Also, removed use of Helper.GetUuid to avoid the use of reflection. Minimised casts.
* CP-36567: Use the datasource units as specified in the API instead of deducing them from the datasource name.
- Also, merged static method DataSet.Create into the DataSet constructor.
- Minor restructuring of the ArchiveMaintainer file (moved all private fields
and properties closer together).
- Added new resource file so the units can be separated from Messages.
- Also, merged static method DataSet.Create into the DataSet constructor.
- Minor restructuring of the ArchiveMaintainer file (moved all private fields
and properties closer together).
- Added new resource file so the units can be separated from Messages.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, removed use of Helper.GetUuid to avoid the use of reflection. Minimised casts.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- DataKey.Hide was unused. Once removed, DataSet.Deselected was unused, hence was also removed.
- Dataset.Draw was duplicating DataSet.Show, hence was removed.
- DataSet.NeverShow is not necessary, DataSet.Hide can be used both for datasources
that should not be shown at all as well as datasources that are wrong for this object.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Fixed broken test due to missing static images.
- Fixed NUnitEngineExeption thrown due to StackOverflowException when searching
for non-existing assembly (due to wrong branding).
- Commented out ignored tests causing the overall NUnit result to be reported as
Warning instead of Passed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This allows removal of DelegatedAsyncAction.ResultObject, which might lead to complicated implementations.
Also: some refactoring of the other WLB retrieve recommendations actions.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Fixed exception handling in RetrieveWlbConfiguration action (exceptions of type
other than Failure were silenced).
- CA-339666: Fixed control flickering when showing the WorkloadReports dialog.
- Retrieve the WlbConfiguration before attempting populating the controls.
- If the dialog was launched requesting a certian report to be run, the report
was not selected on the list.
- Some refactoring to simplify the code.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Moved the business logic classes to XenModel close to their base class.
- Moved WorkloadReports dialog close to the other WLB dialogs.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Note that OS.Version.Major=6 covers up to and including the supported Win8.1 and
WS2012, but there is not point in using earlier windows colour schemes for them.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Moving and copying a VM should be treated differently, hence we need a different
SrPickerItem subclass for each operation. Minor logic simplifications.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, NoTargetServerPoolItem class should be private to the SelectMultipleVMDestinationPage
because it is not used anywhere else.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Reordered the labels to reduce flickering for short actions.
- No need to fire action events in a try-catch block.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
For reasons of code reduction and also because the look and feel of this dialog
was slightly different from the usual application pop-ups.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-35838: Add health check precheck into RPU wizard
* CP-35838: Add disable Health Check in RPU precheck warning
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
- Stop rethrowing exceptions.
- Added some checks.
- Renamed method XenCenterUUID to GetXenCenterUUID to match the methods
SetXenCenterUUID and RemoveXenCenterUUID.
- Replaced check via static string list with a string switch block.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Not sure why I had added that since the containing protected method is probably
more relevant as a static method in the Problem class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, try plugging PBDs only for the host in question (other hosts are not necessary,
as the PBDs are re-checked for any previously evacuated VMs before repatriation).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
The rdpControl was set to null too soon and by the time the timer ticked it had
no chance to be disposed of at all. Also, the timer itself was not disposed of.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Ensure we read the updates.xml location anew from the registry, otherwise the
application has to be relaunched to pick a registry change. Look in both hives
HKCU and HKLM. To avoid performance impact on the UI, move the operation into
the action's Run() body.
- Some refactoring to improve OOP design and fix XmlReader leak.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
There was a silent exception thrown when reading the window location the first
time the application was launched.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
The dialog is launched non-modally, hence showing the grip automatically has no effect.
Also, made the dialog slightly bigger.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Hid properties from the designer and renamed them because they give the wrong impression.
* Fixed some inefficiencies around the NetworkComboboxItem.
- Move NetworkComboBoxItem into the NetworkComboBox class.
- Moved XenAdmin.Dialogs.NetworkComboBoxItem into the VIFDialog class and made it
private to avoid ambiguousness with the public XenAdmin.Controls.NetworkComboBox.NetworkComboboxItem.
- Create a NetworkComboBoxItem only if needed and assign its name at construction time.
- Add method to select a NetworkComboBoxItem and property to return the SelectedNetwork.
* CA-339233: Do not allow selection of networks while they're locked.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Improvements to progress reporting (CA-65894).
- Added some logging.
- Use the connection cache instead of making server calls.
- Moved some methods to the string utilities and added unit tests.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Previously this was not possible due to XenModel-XenOvfTransport cyclical references.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CA-343763: Corrected the handling of VMSS alert priority/severity according to CA-342874.
- Distinguish between warnings and errors.
- Made PolicyAlert derive from MessageAlert to conform with other alert types.
- Replaced EventType column by a simple image column because it adds to clatter
without really offering useful information.
* Correction as per code review.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- CP-34862: Do not allow nomination of new master if a pool secret rotation or
other pool operations are in progress.
- CA-292642: Fixed button enablement after resolving VM problem.
- CA-284126: Added button to rescan running VMs on the server.
- Removed annoying, focus stealing, modal action progress dialog. When scanning
for VMs show a spinner on the control instead.
- Fixed crash when the host combobox was updated due to cache changes.
- Logging in an elevated session was happening on the UI thread.
- Show the role elevation dialog before launching the host evacuation dialog or
we end up with showing the user an unpopulated control.
- Stop deriving from animated progress dialog because it makes it difficult to
get the resizing right when adding more controls.
- Stop using the progress bar for the VM solution actions; rely simply on the
action's description and the VM's icon in the gridView.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Use CommandButtons on the HA TabPage for configuring/disabling HA.
- Added menu item to disable HA.
- There is no point in hiding the buttons on the HA TabPage when the corresponding
menu items are available. They should rather offer the same user experience.
- Added RBAC page to the HaWizard to avoid unnecessary SR scanning only to be told
that one cannot proceed.
- Show RBAC error dialog if the user does not have permission to launch the
EditVmPriorities dialog.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Disabled button tooltips did not disappear when the DataGridView selection was cleared.
- The disabled Activate/Deactivate button had no tooltip for template disks.
- Minor improvement to the tooltip of the Delete button.
- The Add button was using the enablement logic of the AttachVirtualDiskCommand.
- Use CommandButtons to avoid logic duplication.
- Hide the CommandButton.Command from the designer as it's mostly assigned programmatically.
- Increased the minimum width of the non-autosizable columns so they remain visible.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Use a plain list to store update alerts and, where possible, fire a collection
change event only after a bulk change and not every time a single object is added
or removed.
- Fixed issue where dismissed updates were stored in the config of all connected
pools, even of those where the update did not apply.
- Corrected RBAC checks for update dismissal.
- Fixed enabled state of dismiss buttons.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, remove the upgrade methods from the resource files since they are not meant
to be translated.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also: removed unused method; some property modernisation; removed class
LiveMigrateOptionsVmMapping which was rather complicating things.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, reduced visibility of the methods moving between wizard pages to avoid
creating complex situations.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* Replaced LicenseWarningDialog with a simple WarningDialog.
* Replaced VcpuWarningDialog with a simple WarningDialog.
* Replaced RemoveCrashdumpsWarningDialog with a simple WarningDialog.
* Replaced UsbUsageDialog with a simple WarningDialog.
* Replaced WlbDeleteReportSubscriptionDialog with a simple WarningDialog. Added null checks to event invocation.
* Replaced DisableWlbDialog with a simple Warning dialog.
* Replaced ConnectionRefusedDialog with a simple Error dialog.
* Replaced UserDeviceDialog with a simple Warning dialog.
* Replaced RevertDialog with a simple Warning dialog.
* Removed unused dialogs.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Although it may look tidy to log the settings in the OptionsDialogPages that
expose them to the user, in reality it makes for unnecessarily complicated code
design as it places business logic in UI code and mixes the class dependencies.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Removed unnecessary abstractions. Replaced named delegates with anonymous ones.
Use pattern matching and avoid multiple casts. Be consistent in the properties
we check.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Replaced remaining instances of SystemIcons. SystemIcons.Information of size
32x32 were excepted as we don't have the right size icon yet.
- The question mark icon is used for help, not for asking questions.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, stop boxing Bitmap into Image so as to avoid casting wherever it is called.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Added controls to display the error in case authentication fails.
- Use the same control(LinkLabel) to show the rubric either when new
authentication is needed or an existing one can be used.
- Moved privacy policy statement next to the checkbox because it looked crammed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Disposing the vncTabView disconnects the RdpClient and should not be called after
base.Dispose() is called on VNCView, because the latter has released the COM objects
and causes an InvalidComObjectException to be thrown.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Exclude VNC key map from l10n tests.
- Added parameterless constructors to the archive classes for use by the tests.
- Scalability tests were removed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Since the standalone VNC control was removed, the VNC code has been used only by
the UI project. According to Microsoft's performance guidelines large single
assemblies are preferable to multiple smaller ones.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
The result was that numbers were changing suddenly; in cases of slow connections,
a user could make a selection before the scan was over.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Simplified SudoElevationResult.
- Renamed SudoDialogDelegate to ElevatedSessionDelegate so that it makes more sense
for projects not referencing WinForms.
- Call directly the RoleElevationDialog within XenAdmin without using the ElevatedSessionDelegate.
- Minor modernisation in AsyncAction.
- Launch GraphDetailsDialog in a using block.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This fixes various workflow bugs and disallows re-attaching GFS2 SR if clustering
is disabled.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, merged the methods calculating the virtualisation status and its friendly
string so as to simplify the logic.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, move time utility methods to one place (the Util class which contains unit conversions).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Override the polymorphic methods of XenTabPage on the ballooning wizard;
No need to exposed the memory values outside the VMMemoryControlsEdit class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Replace with help links where necessary or convenient. Also:
- Registered unused event.
- Minor refactoring to: make the InstallToolsCommand.CanExecute clearer; use
local methods.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, renamed a couple of parameters because the old name was specific to one error.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- It was not possible to apply different settings to multiple hosts
at the same time.
- Server calls were made on the UI thread.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- NetworkDetails page: reworked it to fix NumericUpdown validation and messages (CA-192746).
- SelectNetworkType page: moved warnings closer to the corresponding network types,
fixed wrong label enabled state and made enablement logic more explicit.
- All pages: property modernisation and control layout tweaks (mostly margins).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
If they are registered on all cases and then unregistered and a new connection is
attempted, the connection dialog launched from the first connection attempt is
not closed after connection is established, because the connection events have
been unregistered.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Otherwise the connection dialog remains open even after a connection that required
entering a new password succeeded.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, remove obsolete lines that delete touch files (they are not created any more).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
