- also made Refresh buttons the same size on Details and Processes page and changed Details tab caption from "Detail" to "Details"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Show a “Read Caching” section on the General Tab of a VM when the VM is running on a Cream or greater host
- When the Read Caching is enabled, the “Read Caching” section will contain two entries: Status and Disks (list of disks with RC enabled)
- When the Read Caching is disabled, the “Read Caching” section will contain two entries: Status and Reason
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Instead of calling the plugin on the UI thread, we call it through an action that we execute asynchronously and on completion update the UI.
- Pause the refresh timer on leaving the page and resume it when entering the page again.
- We do this for both Processes and Details page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Pool_patch.precheck can fail with the xapi error OUT_OF_SPACE when is trying to copy the patch from master to the slaves. This happens before the patch-precheck checks if enough space is available for installation. Therefore is different from the error we are currently processing, PATCH_PRECHECK_FAILED_OUT_OF_SPACE
- If the precheck fails with OUT_OF_SPACE then we try and retrieve the disk space requirements and report a HostOutOfSpaceProblem.
- Changed the PatchPrecheckCheck to try and find problem from a xapi failure, as well as from the result of the precheck call.
- Also removed ampersand from the the link labels (More Info and Clean up)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The cloud config parameters page is only visible on a VM that already has a config drive.
- The cloud config parameters can only be changed when the VM is halted.
- In the New VM wizard, if a template is selected that already has a config drive, them the wizard will display the existing configuration, not the default one.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Remove “Remote access is not enabled on this guest” in cream in below condition:
1.RDP status is on
2.PV driver is cream or greater
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- Showing all detailed information from a docker_inspect call
- The information refresh/polls every 20s while it's open
- Button “Refresh” add, so user can refresh the result. Also shows time when the last refresh happens.
- Add TabPageDetails as value 9903 in HelpManager.resx
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
-Added HostOutOfSpaceProblem to let the user to clean up disk space when getting PATCH_PRECHECK_FAILED_OUT_OF_SPACE error at precheck stage in the patch install wizard.
-A bit of refactoring of DiskSpaceRequirements class in order to be reused here
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This fixes the following issue: when displaying the General tab of a container, the Properties button is hidden, but not made visible again when switching to another object type (e.g. VM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add ports and command in DockerContainer object
2.All labels in General box are internationalized.
3.Add UUID, command, ports in General box
4.Export DockerContainer in ICache
5.Modify tab title to "Container General Properties"
6.Remove properties button
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
New Page: Enlightenment on VM Properties Dialog, visible only for:
- VMs on Cream Or Greater hosts
- that can be enlightened, regardless of their power state
A VM can be enlightened if the key "xscontainer-monitor" exists in other_config.
A VM is enlightened if other_config:xscontainer-monitor if true.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- don't update the progress bar when checking disk space (only the description)
- the color used for "in progress" action description (above the progress bar) should be the system default font color, not black
- actions should throw ArgumentNullException, not NullReferenceException
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Before starting the upload to the master hosts, check if there is enough disk space (check only performed for Cream or greater hosts)
- If enough space available the upload starts automatically; otherwise an error is displayed
- If we can free up enough disk space then we offer the option to Clean up. Otherwise we provide the user with the information on required and available space and the user will have to manually free up required space.
- Also Disable the Upload page for oem updates
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The 'Updates' section on host's General tab displays which packs have been installed onto a host, including the version number
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
UploadSupplementalPackAction:
- use http-put with the default timeout
- throw current exception in RemoveVDI (instead of encapsulating it in a new one)
- add other_config key before uploading to make sure the vdi has this flag set from the beginning of its lifetime
- upload progress bar now shows the total progress per row
Also included a cosmetic rewrite of PatchingWizard_PatchingPage,GetUpdateName function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add xapi version check in cream since Cream and Creedence have the same platform version
2.Check feature-ts2 to see if turn on RDP feature can use on specific VM PV tool
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- update the Patch property even when the selected update type is not "Existing patch". This will be set it to null if the selected type is supplemental pack.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Select a supp pack in the hotfix wizard
- Recognise that it's a supp pack not a hotfix
- Check if there's enough space on a SR to contain it: (1) default SR if shared or (2) any shared SR or (3) local SR on each host in pool
- Create a VDI to contain it
- Upload the supp pack to the VDI
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the case that there are two hosts in a pool, one with GPU and one without, then the one without will display a text saying "There are no GPUs on this server".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added check for Clearwater SP1 or greater to the gpu capability on the New VM wizard
- On the GPU tab, draw the grid on the shiny bar only if the capacity is greater than one
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- Added VM.CanHaveVGpu function (at the moment just returns CanHaveGpu, but it will change in the future)
- Added vGPU_type.IsPassthrough function and used it everywhere we needed to test for passthrough (max-heads==0)
- Simplified code in Helpers.GpuCapability, Helpers.VGpuCapability, NewVMWizard (gpuCapability), MainWindow and GpuRow
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
Instead of showing just the name, this code is showing name with location information in title for all objects that appear in the tree view.
(A new property (NameWithLocation) with a getter accessor defined in IXenObject and has been implemented as virtual in XenObject and overridden at several child classes.)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Show pool (or standalone server) name on the Upload page.
Also corrected some resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added new page to the patching wizard, called "Upload" which displays the upload actions for each server and the progress of these actions
- MultipleAction: added the functionality to optionally stop the action on first failure
- Fixed the error where an existing patch downloaded from another server and then uploaded to a new one was not deleted on cancelling the wizard [CA-156788]
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Correction following code review: When a host collection changes, update all rows containing the hosts changed. This will cover the case when the License Manager shows all members of a pool on separate rows for pre-6.2 versions of XenServer.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The problem was that the License Manager was listening to PropertyChanged events on the master only, not on slaves.
When the master's properties change (e.g. edition) we update the row in the license manager; but in some cases a slave (or more) hasn't been updated yet (as it may be updated in another event.from) and we think that the pool is partially updated.
Our solution is to listen to Host BatchCollectionChanged event, which is triggered once per cache update for the host collection (it any property changed for any of the hosts).
The sleep in the ApplyLicenseEditionAction is not needed anymore, nor is the extra call to update the cell after the action is completed, because the cell is getting updated correctly on the BatchCollectionChanged event.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The Free license never expires and is confusing to see "Unlicensed" or "Unsupported" hosts with expiry date "Never".
Added the ability to add "hidden" entries to the General tab sections and to update their visibility when needed without regenerating the whole section.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
