* CA-34231: Replace negative language with `block list` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `stop` in code and references
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `freezing` in code
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run/ran` in code comments
Some paramater mentions have been renamed, as they will be renamed in future commits.
Excluded mentions in XenAPI/Host.cs and XenAPI/VM.cs since code is autogenerated.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CommandLineOptions/CFUCommandLineOptionManager.cs
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
* CA-34231: Replace negative language with `run` in Command.cs Run method
Used Resharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/TabPages/GeneralTabPage.cs
* CA-34231: Replace negative language with `run` in Command.cs CanRun method
Used Resharper rename utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs CanRunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/DRConfigureCommand.cs
# XenAdmin/Commands/DRDryrunCommand.cs
# XenAdmin/Commands/DRFailbackCommand.cs
# XenAdmin/Commands/DRFailoverCommand.cs
# XenAdmin/Commands/DisasterRecoveryCommand.cs
# XenAdmin/Commands/VMGroupCommand.cs
* CA-34231: Replace negative language with `run` in Command.cs RunCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantExecuteReasonCore method
Used ReSharper rename utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in Command.cs GetCantRunReasons method
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Command.cs
Also applied to related symbols. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods named CanRun
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in methods in CrossPoolMigrateCommand.cs
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/CrossPoolMigrateCommand.cs
* CA-34231: Replace negative language with `run` in remaining Run methods
Also updated negative language in `DeleteVMCommand`
Also updated in comment in `CrossPoolMigrateCommand`
Also renamed missed instances of `CanRun`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `run` in `CanRunCore` and `RunCore`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in Commands folder
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `run` in XenAdmin/Controls folder
Used ReSharper renaming utility. Had to rename `WlbReportView.xs:RunReport()` to `WlbReportView.xs:StartRunReport()` to resolve conflict with change from `WlbReportView:ExecuteReport()` to `WlbReportView:RunReport()`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Controls/Wlb/WlbOptModeScheduler.cs
# XenAdmin/Dialogs/Wlb/WorkloadReports.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
* CA-34231: Replace all remaining negative language with `run` in code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/Controls/WlbRecommendations.cs
# XenAdminTests/UnitTests/WlbTests/WlbScheduledTaskTests.cs
# XenModel/WLB/WlbScheduledTask.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in code strings
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in Messages string
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative language with `supporter` in .resx files
Used ReSharper renaming utility. FriendlyErrorNames.resx has been excluded.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `supporter` or `bond member` in XenAdmin code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `supporter` or `bond member` in XenModel code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in CFUValidator code
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# CFUValidator/CFUValidator.cs
* CA-34231: Replace negative language with `coordinator` in solution's comments and hardcoded strings
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Helpers:GetCoordinator` method
Used ReSharper renaming utility.
also renamed similarly named method in `ObjectChange.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Alerts/Types/HotfixEligibilityAlert.cs
# XenAdmin/Controls/CustomDataGraph/ArchiveMaintainer.cs
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resources
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/EvacuateHostDialog.resx
* CA-34231: Replace negative language with `coordinator` in `EvacuateHostDialog.resx`
Used ReSharper renaming utility. Excluded jp and zh resource files.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.resx
* CA-34231: Rename missing language references for change to `coordinator`
Misc files were not saved before last commits.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `Messages.resx`'s code
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/HACommand.cs
# XenAdmin/TabPages/AdPage.cs
# XenModel/Actions/Network/CreateBondAction.cs
# XenModel/Actions/Network/NetworkAction.cs
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace negative language with `coordinator` in `ExternalPluginAction.cs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`
Used ReSharper renaming utility. Also replace negative language in missed comment in `ExternalPluginAction.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
# XenAdmin/Commands/HACommand.cs
* CA-34231: Replace negative language with `coordinator` in `Helpers.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `NetworkingHelper.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `PoolJoinRules.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Commands`, `Controls`, and `Core`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Commands/AddHostToPoolCommand.cs
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Diagnostics`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `coordinator` in `XenAdmin/Dialogs`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/NewPoolDialog.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenAdmin`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/MainWindow.cs
# XenAdmin/TabPages/GeneralTabPage.cs
# XenAdmin/Wizards/PatchingWizard/PatchingWizard_SelectServers.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeExtrasPage.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizard.cs
# XenAdmin/Wizards/RollingUpgradeWizard/RollingUpgradeWizardPrecheckPage.cs
# XenAdmin/XenSearch/Columns.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel\Actions`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Actions/Network/CreateBondAction.cs
* CA-34231: Replace remaining negative language with `coordinator` in `XenModel`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative strings with `main` in `Messages.resx`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenModel/Messages.Designer.cs
# XenModel/Messages.resx
* CA-34231: Replace remaining negative string names with `main` in `Messages.resx`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
# XenModel/Messages.resx
* CA-34231: Rename dialogs to replace negative connotations with `main`
Used ReSharper renaming utility
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `SaveAndResoreOptionsPage.cs`
Also updated its resx file. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
# Conflicts:
# XenAdmin/Dialogs/OptionsPages/SaveAndRestoreOptionsPage.cs
* CA-34231: Fix invalid reference in `SaveAndRestoreOptionsPage.Designer.cs` after renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `EnterMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `ChangeMainPasswordDialog.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Fix invalid reference not changed after renaming `EnterMainPasswordDialog.cs`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language with `main` in `XenAdmin/Dialogs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Update class names in HelpManager.resx
Following renaming of main password dialog. Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace negative language with `main` in `Metadata.cs`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `coordinator` from `Messages.resx`
Used ReSharper renaming
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Remove remaning negative language with `other pool member` from `Messages.resx`
Used ReSharper
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-34231: Replace remaining negative language in solution
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove commented out code in VNCGraphicsClient.cs
Code has only been improved partially as it's not strictly relevant to the PR
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend negative word replacement in XSVNCScreen.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Simplify debug call formatting in NewPoolDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Add code mistakenly removed in MainWindow.cs
Removed as part of `f155f9c8`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Revert renaming of constant related to Windows' API
Considered external to CH Center
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend hotkey for Coordinator field in `NewPoolDialog`
Previous ALT+<key> hotkey was conflicting with CreatePool
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Remove unecessary whitespace in EvacuateHostDialog.cs
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Update if block to exclude unecessary else in DRFailoverWizard.cs
Not relevant to the PR, but the change is small enought to no need extra testing
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend typo in PoolJoinRules.cs
supporer -> supporter
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace missing negative language with `coordinator` in `XenAPI-Extensions/Pool.cs`
Variables and methods XenAPI-Extensions were mistakenly skipped
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `coordinator/interface`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace negative language in `XenApi-Extensions` with `supporter/member`
Used ReSharper renaming utility.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Replace remaining negative language in `XenServerHealthCheckBugTool.cs`
This is only used to format the string
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Change line-endings to CRLF in `Page_CloudConfigParamters.cs`
Done in order to fix merge conflict into master
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CP-34231: Amend misc negative language renaming typos
`XenServerHealthCheckBugTool` and `XenServerHealthCheckService`
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Hide GPU page if the host has no GPU capability
* Hid GPU page in PropertiesDialog
* Hid GPU page in NewVMWizard
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Move GPU availability check to Helpers class
* Switch from field to method based check
* Update affected logic
* Remove rubric toggle in PopulatePage when GpuEditPage is shown
* Hide AddVGPUDialog when GpusAvailable returns false
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Remove missing GPUs strings in Messages.resx
* GPU_RUBRIC_NO_GPUS_POOL
* GPU_RUBRIC_NO_GPUS_SERVER
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Disable combobox in AddVGPUDialog when there are no GPUs
Avoids exception being thrown if user tries to select empty first item
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Amend position of GPU availability check
Moved since gpuCapability is used in the Finish method of the wizard
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* CA-310974: Remove unecessary null checks in Helpers method
The Cache and its properties (e.g. GPU_groups) are readonly and initialised as empty.
The API object properties that are ref lists (g.PGPUs, g.supported_VGPU_types) are also initialised as empty and are demarshalled by the SDK as empty if they have no values.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* The solution libraries do not need a config file like the applications.
In fact the config file of XenAdminTests was mostly an unneeded copy of the
XenAdmin app.config; the NUnit setting has moved to the AssemblyInfo in NUnit3.
* Removed unused XenOvfApi settings.
* The constants in the Settings were largely not configurable, hence I moved them into the code.
The ones marked with TODO will be revisited within CP-32779.
* Removed config file from library XenOvfApi. Restored broken cryptography algorithm lookup.
(The list of algorithms had been removed from the Settings within the fix to CA-350574).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also moved initial description update from base constructor call to body of subclass constructor.
Signed-off-by: Danilo Del Busso <Danilo.Del.Busso@citrix.com>
* DataSet field Uuid is not really a uuid. Renamed to Id to avoid misunderstandings.
* Renamed properties DataSet.Type and DataSourceItem.DataType to Category. The old name was not reflecting what they were.
* Renamed property DataSet.TypeString to DataSet.DataSourceName so it reflects better what it is.
* Renamed property DataSet.Name to DataSet.FriendlyName for clarity. Removed duplicate string.Format() call.
* The DataSourceItem.Uuid is not really a uuid. Renamed it to Id to avoid misunderstandings. Also, compacted DataSourceItem constructors.
* Removed unused and duplicate properties.
- DataKey.Hide was unused. Once removed, DataSet.Deselected was unused, hence was also removed.
- Dataset.Draw was duplicating DataSet.Show, hence was removed.
- DataSet.NeverShow is not necessary, DataSet.Hide can be used both for datasources
that should not be shown at all as well as datasources that are wrong for this object.
* Made DataSet.FriendlyName a get-only property and compacted repetitive code.
* Use the Helpers regular expressions for assigning the datasource category.
* Removed id from the DataSet constructor parameters. It can be constructed from the XenObject and the datasource name.
* Compacted the code for readability (it was difficult to follow the build of the URIs).
Also, removed use of Helper.GetUuid to avoid the use of reflection. Minimised casts.
* CP-36567: Use the datasource units as specified in the API instead of deducing them from the datasource name.
- Also, merged static method DataSet.Create into the DataSet constructor.
- Minor restructuring of the ArchiveMaintainer file (moved all private fields
and properties closer together).
- Added new resource file so the units can be separated from Messages.
- Also, merged static method DataSet.Create into the DataSet constructor.
- Minor restructuring of the ArchiveMaintainer file (moved all private fields
and properties closer together).
- Added new resource file so the units can be separated from Messages.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Fixed broken test due to missing static images.
- Fixed NUnitEngineExeption thrown due to StackOverflowException when searching
for non-existing assembly (due to wrong branding).
- Commented out ignored tests causing the overall NUnit result to be reported as
Warning instead of Passed.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This allows removal of DelegatedAsyncAction.ResultObject, which might lead to complicated implementations.
Also: some refactoring of the other WLB retrieve recommendations actions.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Fixed exception handling in RetrieveWlbConfiguration action (exceptions of type
other than Failure were silenced).
- CA-339666: Fixed control flickering when showing the WorkloadReports dialog.
- Retrieve the WlbConfiguration before attempting populating the controls.
- If the dialog was launched requesting a certian report to be run, the report
was not selected on the list.
- Some refactoring to simplify the code.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Moved the business logic classes to XenModel close to their base class.
- Moved WorkloadReports dialog close to the other WLB dialogs.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Moving and copying a VM should be treated differently, hence we need a different
SrPickerItem subclass for each operation. Minor logic simplifications.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, NoTargetServerPoolItem class should be private to the SelectMultipleVMDestinationPage
because it is not used anywhere else.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Reordered the labels to reduce flickering for short actions.
- No need to fire action events in a try-catch block.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
All currently supported versions of the product support 255 VBDs,
see https://docs.citrix.com/en-us/xenserver/7-0/downloads/config-limits.pdf
When a VM is imported through XCM it may not have recommendations,
and XenCenter falls back to the default, which is 16.
Then adding another disk shows an error that the maximum number of disks was reached,
which contradicts our support statement of 255 disks.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
For reasons of code reduction and also because the look and feel of this dialog
was slightly different from the usual application pop-ups.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
* CP-35838: Add health check precheck into RPU wizard
* CP-35838: Add disable Health Check in RPU precheck warning
Signed-off-by: Ji Jiang <ji.jiang@citrix.com>
- Removed wrapper delegates; call the http_actions directly.
- In case of failure or cancellation of the http_action, poll the related task
ignoring any exceptions thrown, so that any clean up code within the http_action's exception handling can run.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This simplifies the code since the TaskPoller cannot be perceived without an AsyncAction.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Stop rethrowing exceptions.
- Added some checks.
- Renamed method XenCenterUUID to GetXenCenterUUID to match the methods
SetXenCenterUUID and RemoveXenCenterUUID.
- Replaced check via static string list with a string switch block.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also, try plugging PBDs only for the host in question (other hosts are not necessary,
as the PBDs are re-checked for any previously evacuated VMs before repatriation).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Regression introduced by the changes for CA-64500. Since we initiate a VMStartAction
we need to ensure that the VM object passed to the action has a non-null Connection.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- Moved the code to the ExportApplianceAction so it's easier to modify the
action's description.
- Fixed issue where the user's option for adding signature/manifest to a plain
OVF package was ignored.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
