- changes to the text to be suitable for migrate and copy operations, where possible
- added different text for copy on some pages
- also different text for single and multiple selection
- changes to text alignment, tab order, hotkeys on the copy pages
- removed Finish page from the intra-pool copy wizard
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- while upgrading a host, throw a HOST_OFFLINE ("Server could not be contacted") exception if the host can no longer be resolved (instead of HANDLE_INVALID)
- also corrected the parameters of the HANDLE_INVALID exception, as an extra parameter is needed for the friendly error name.
- in the UpdateManualHostPlanAction class I replaced Host with the private property _host in several places, so we are no longer trying to resolve the host each time we want to write something into logs
- added some null checks, to avoid reporting null reference exception
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added some null checks
- in the Cross pool migrate wizard, add Transfer network page for all cases except intra-pool move (which is performed via VMMoveAction)
- added comments to VMCrossPoolMigrateAction constructor to make it cleared what the copy parameter means
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-New Network Wizard: Changing the layout on the network type selection page to make this page "dpi aware" using FlowLayoutPanel. Additional info is shown on the bottom of the panel instead of tooltips, some code has been removed that used fix positions and moved controls around.
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- modified CopyTemplateCommand to launch a cross pool copy if permitted
- added CrossPoolCopyTemplateCommand which opens the Cross pool migration wizard in "copy" mode
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- added a "copy mode" page to the Cross pool migrate wizard (when in copy mode) where the user can select intra-pool or cross-pool copy
- If intra-pool option is selected, then the wizard will display a page similar to what we currently have in the Copy VM dialog
- If cross-pool option is selected, then the wizard will display all the cross pool migration pages
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- modified the VMCopyCommand to launch a cross pool copy if permitted
- added the CrossPoolCopyVMCommand which opens the Cross pool migration wizard in "copy" mode
- modified the cross pool migrate action with an extra "copy" parameter, which will add a copy option to the vm.migrate_send function call
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When deciding whether to allow GPU configuration on a VM, check if the HA is enabled, not just the the VM's restart priority setting
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-We used to check host.RestrictVgpu instead of checking the API version when populating the dropdown on the GPU Settings page. This is not sufficient anymore as it depends on the license too, so changed the code to check version (vGPU was introduced in Clearwater SP1).
Changes following code review:
- add static methods to the cross pool migrate and move commands to determine if the command can execute
- In the Cross Pool migrate wizard: add Transfer network page for cross-pool move (and copy) operation (as well as all migrate cases)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
This code change is to set “switchOnTabOpened” in below condition:
1. XenCenter have “Automatically switch to the Remote Desktop console when it becomes available" selected
2. VM have RDP enabled.
3. XenServer Version is Cream or greater.
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
-Making CIFS radio button invisible (instead of visible but disabled) when CIFS is restricted (license)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-New SR Wizard - SR Type Selection page: radio buttons are now on a TableLayoutPanel with auto sized rows
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- With these changes, a stopped or suspended VM can be moved across pools; this is performed as a vm migrate operation.
- The intra pool move will continue to be a vdi.copy + destroy operation for stopped VMs, but for suspended VMs we need to do it a as vm migrate operation.
- We use the Cross Pool migrate wizard for both intra and cross pool move operations, but introduced a wizard mode parameter in order to adapt the wizard to the specific operation we want to perform (migrate, move or copy)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-NFS version selector radio buttons now belong to the Create new SR option. This section is disabled on reattaching.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
New SR Wizard:
* Removed "V" Alt-key from "NFS Version" text
* Changed the alignment of the NFS version selector radio buttons to vertical
* Fixed tab orders at all places
"* New SR wizard -> Type page: Add more info for CIFS (similar to what we display for NFS)
* New SR wizard -> Type page: Rename the other types to:
** Virtual disk storage: NFS, iSCSI, Hardware HBA, CIFS
** ISO library: Windows File Sharing (CIFS), NFS ISO
* Autogenerated description should say "CIFS SR" (not NFS SR)
* SR type (as displayed on the General tab for a CIFS SR) should by CIFS (not Unknown)
* New SR wizard -> Location page for CIFS: correct tab order"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- override the Equals function on HostOutOfSpaceProblem to check the disk space requirements, not the Description.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Show ports as: Address: 0.0.0.0; Public port: 8088; Private port: 8088; Protocol: tcp (multiple lines if more than one set)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-updating Errors property in SrWizardType_Cifs with the Failures that can occur when doing CIFS SR operations
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Implemented changes as follows (copied from ticket):
"I'd suggest the following use-ability/homogeneity fixes for the new container management tabs, if they are quick and easy:
Combine "Docker Version" and "Docker Information" on the VM-General-tab into "Container Management - Docker Status" with the following fields only:
API version
Version
Git Commit
Driver
Index Server Address
Execution Driver
IPv4 Forwarding
In the "Processes" tab, change the name from "Docker Processes" to "Container Processes"
In the "Details" tab, change the name from "Docker Detail" to "Container Details"
In the "Details" tab, drop the top level element "docker_inspect" (XML requires a single root-node, afaik the Windows form treenode does not), or alternatively open the root node by default and rename it to "Inspect Result"
In the "Details" tab, add the "Details"-headline in black on white - just like on the "Processes"-tab
Also, on the container's General tab, show Properties button disabled, instead on hiding it (to be consistent to other cases, e.g. disconnected servers)
"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Added support for CIFS (SR type, SR Wizard)
-Added some Debug.Asserts to the Create SR action to watch for clear text paswords
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- When the install fails, log the full error description
- Added a specific exception for the supp pack installation failure
- Better action title (depending on the number of servers it applies to)
- Added a "More Info" button on the "Update" page, which displays a message with more information on the supp pack installation failure
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- If failed to retrieve the config parameters, then make the ConfigDriveTemplate textbox read-only and display the reason why it is not editable (similar with what we do for running VMs).
- In the New VM Wizard, if the action on "Reset to Default" button fails, then popup a message box with an error saying that we were unable to retrieve the default parameters. In this case, the ConfigDriveTemplate textbox remains unchanged.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- changes following code review: simplified the code that determines the current state; and renamed some variables.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added a "Integrated GPU passthrough" section to the PoolGpuEdit page.
- This section is only visible for a host that has GPU capability and the enabling/disabling of integrated GPU passthrough is not restricted.
- With this addition, the GPU page can now be displayed for a pooled host as well (previously only pool or standalone host)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Disable the Refresh button while a refresh is in progress.
- Introduced ExecuteContainerPluginAction - an action that stores the container it was called for, so that on completion we can decide whether to update the view or not (if the container displayed has changed, then we shouldn't update the view with the results from a previously selected container).
These changes apply to container Processes and Details tabs.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- also made Refresh buttons the same size on Details and Processes page and changed Details tab caption from "Detail" to "Details"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- this applies to the Cloud-config page on the New VM Wizard and VM properties dialog.
- same for the container enlightenment page on the VM properties dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Show a “Read Caching” section on the General Tab of a VM when the VM is running on a Cream or greater host
- When the Read Caching is enabled, the “Read Caching” section will contain two entries: Status and Disks (list of disks with RC enabled)
- When the Read Caching is disabled, the “Read Caching” section will contain two entries: Status and Reason
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Instead of calling the plugin on the UI thread, we call it through an action that we execute asynchronously and on completion update the UI.
- Pause the refresh timer on leaving the page and resume it when entering the page again.
- We do this for both Processes and Details page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Pool_patch.precheck can fail with the xapi error OUT_OF_SPACE when is trying to copy the patch from master to the slaves. This happens before the patch-precheck checks if enough space is available for installation. Therefore is different from the error we are currently processing, PATCH_PRECHECK_FAILED_OUT_OF_SPACE
- If the precheck fails with OUT_OF_SPACE then we try and retrieve the disk space requirements and report a HostOutOfSpaceProblem.
- Changed the PatchPrecheckCheck to try and find problem from a xapi failure, as well as from the result of the precheck call.
- Also removed ampersand from the the link labels (More Info and Clean up)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The cloud config parameters page is only visible on a VM that already has a config drive.
- The cloud config parameters can only be changed when the VM is halted.
- In the New VM wizard, if a template is selected that already has a config drive, them the wizard will display the existing configuration, not the default one.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Remove “Remote access is not enabled on this guest” in cream in below condition:
1.RDP status is on
2.PV driver is cream or greater
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- Showing all detailed information from a docker_inspect call
- The information refresh/polls every 20s while it's open
- Button “Refresh” add, so user can refresh the result. Also shows time when the last refresh happens.
- Add TabPageDetails as value 9903 in HelpManager.resx
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
-Added HostOutOfSpaceProblem to let the user to clean up disk space when getting PATCH_PRECHECK_FAILED_OUT_OF_SPACE error at precheck stage in the patch install wizard.
-A bit of refactoring of DiskSpaceRequirements class in order to be reused here
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
This fixes the following issue: when displaying the General tab of a container, the Properties button is hidden, but not made visible again when switching to another object type (e.g. VM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add ports and command in DockerContainer object
2.All labels in General box are internationalized.
3.Add UUID, command, ports in General box
4.Export DockerContainer in ICache
5.Modify tab title to "Container General Properties"
6.Remove properties button
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
New Page: Enlightenment on VM Properties Dialog, visible only for:
- VMs on Cream Or Greater hosts
- that can be enlightened, regardless of their power state
A VM can be enlightened if the key "xscontainer-monitor" exists in other_config.
A VM is enlightened if other_config:xscontainer-monitor if true.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- don't update the progress bar when checking disk space (only the description)
- the color used for "in progress" action description (above the progress bar) should be the system default font color, not black
- actions should throw ArgumentNullException, not NullReferenceException
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Before starting the upload to the master hosts, check if there is enough disk space (check only performed for Cream or greater hosts)
- If enough space available the upload starts automatically; otherwise an error is displayed
- If we can free up enough disk space then we offer the option to Clean up. Otherwise we provide the user with the information on required and available space and the user will have to manually free up required space.
- Also Disable the Upload page for oem updates
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The 'Updates' section on host's General tab displays which packs have been installed onto a host, including the version number
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
UploadSupplementalPackAction:
- use http-put with the default timeout
- throw current exception in RemoveVDI (instead of encapsulating it in a new one)
- add other_config key before uploading to make sure the vdi has this flag set from the beginning of its lifetime
- upload progress bar now shows the total progress per row
Also included a cosmetic rewrite of PatchingWizard_PatchingPage,GetUpdateName function
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add xapi version check in cream since Cream and Creedence have the same platform version
2.Check feature-ts2 to see if turn on RDP feature can use on specific VM PV tool
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
- update the Patch property even when the selected update type is not "Existing patch". This will be set it to null if the selected type is supplemental pack.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Select a supp pack in the hotfix wizard
- Recognise that it's a supp pack not a hotfix
- Check if there's enough space on a SR to contain it: (1) default SR if shared or (2) any shared SR or (3) local SR on each host in pool
- Create a VDI to contain it
- Upload the supp pack to the VDI
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the case that there are two hosts in a pool, one with GPU and one without, then the one without will display a text saying "There are no GPUs on this server".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added check for Clearwater SP1 or greater to the gpu capability on the New VM wizard
- On the GPU tab, draw the grid on the shiny bar only if the capacity is greater than one
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes following code review:
- Added VM.CanHaveVGpu function (at the moment just returns CanHaveGpu, but it will change in the future)
- Added vGPU_type.IsPassthrough function and used it everywhere we needed to test for passthrough (max-heads==0)
- Simplified code in Helpers.GpuCapability, Helpers.VGpuCapability, NewVMWizard (gpuCapability), MainWindow and GpuRow
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
Instead of showing just the name, this code is showing name with location information in title for all objects that appear in the tree view.
(A new property (NameWithLocation) with a getter accessor defined in IXenObject and has been implemented as virtual in XenObject and overridden at several child classes.)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Show pool (or standalone server) name on the Upload page.
Also corrected some resource strings.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added new page to the patching wizard, called "Upload" which displays the upload actions for each server and the progress of these actions
- MultipleAction: added the functionality to optionally stop the action on first failure
- Fixed the error where an existing patch downloaded from another server and then uploaded to a new one was not deleted on cancelling the wizard [CA-156788]
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Correction following code review: When a host collection changes, update all rows containing the hosts changed. This will cover the case when the License Manager shows all members of a pool on separate rows for pre-6.2 versions of XenServer.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The problem was that the License Manager was listening to PropertyChanged events on the master only, not on slaves.
When the master's properties change (e.g. edition) we update the row in the license manager; but in some cases a slave (or more) hasn't been updated yet (as it may be updated in another event.from) and we think that the pool is partially updated.
Our solution is to listen to Host BatchCollectionChanged event, which is triggered once per cache update for the host collection (it any property changed for any of the hosts).
The sleep in the ApplyLicenseEditionAction is not needed anymore, nor is the extra call to update the cell after the action is completed, because the cell is getting updated correctly on the BatchCollectionChanged event.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The Free license never expires and is confusing to see "Unlicensed" or "Unsupported" hosts with expiry date "Never".
Added the ability to add "hidden" entries to the General tab sections and to update their visibility when needed without regenerating the whole section.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes to the License Manager dialog:
- Summary panel: show smaller icons for warning and information messages
- Summary panel: show license entitlements for all Creedence hosts (not eligible for support, eligible for support, enterprise features enabled, etc)
- for free Creedence or Clearwater hosts, the license status is Free (it used to be Expired for ClearwaterOrGreater)
and the text displayed is "Unlicensed" for Creedence and "Unsupported" for Clearwater;
the warning message is "Not eligible for support" (instead of "Your support and maintenance has expired")
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
To to determine if the feature is restricted we use:
- "restrict_export_resource_data" license flag for Creedence hosts
- license edition and expiry date for pre-Creedence hosts
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In some cases calling Control.Invoke() from a background thread causes that thread to go in a "sleep, wait, or join" mode, while waiting for Invoke to happen, although the UI thread is running normally.
If the Control is the MainWindow, it works as expected, but we've seen it happening while connecting or disconnecting from a large pool, on calling Invoke on controls like NavigationView, AlertSummaryPage, HistoryPage, etc.
To fix this, we call the Invoke on the MainWindow in all the places where we've seen the issue.
With this changes, the previous fix for CA-148245 (call RequestRefreshTreeView on CacheClearing event) is not needed anymore, so I removed that call.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changes following the code review: To minimize the distance between the OK button and the "View Legal Notices" link, the latter has been aligned to the Bottom-Left and the height of its container row has been set to 100% instead of Auto.
-Changed Location to Server or Server/Pool in the views contained by the Notifications View
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Showing link to CTX page if StorageLink problem was found at pre-check (in RPU Wizard)
-Enable the Resolve All button on the pre-check page only when there is at least one problem found and all the problems have solution/fix - minor refactoring
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Based on the discussion of CA-144708, when error happens or the Current Server is listed and disabled
in the recommendation host list, there is no rating score and star actually, so it is good to hide the
zero star to avoid confusing.
This fix hides the zero star indication on XenCenter GUI.
Signed-off-by: Zheng Chai <zheng.chai@citrix.com>
- If XenCenter node or a disconnected host is selected, show the default search.
- Otherwise, find the top-level parent (= pool or standalone server) and show the search restricted to that.
- In the case of multiselect, if all the selections are within one pool (or standalone server), then show that report.
- Otherwise show everything, as on the XenCenter node.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Fixing issue as per Mihaela's review: "when an object and its parent (i.e. the group) are selected, the search result should be the search on that group"
-Fixed search on Objects view when multiple items were selected. If one item is selected the behaviuor is unchanged. If multiple items are selected the common ancestor's search is displayed if there is one, otherwise we display the search view that belongs to the root node (Objects by Type).
For issue 1, move the "labelStartDate" location to left with 4 points.
This would make the gap between "labelStartDate" and "StartDatePicker" larger than others under Windows EN.
For issue 2, would not extend the size of "StartDatePicker" and "EndDatePicker" since they would occupy other labels and comboBoxes' room.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
-I defined save and restore selection functionality in SelectionBroadcaster and implemented them in SelectionManager. The NavigationPanel now uses these to: 1) save the current Selection (context) when the user switches to the Notification view, 2) to restore previous selection when switching away from the Notifications view.
Fix the following display issues:
1. Should leave more space upon pool granularity setting with XenCenter Chinese version.
2. "Close" should not be the default button when "Previous Section" or "Next Section" is enabled.
3. On WLB advanced settings page, the split line of pool audit granularity should extend and contract along with the size change of the form.
4. For large pool audit trail report, click "Next Section" till the report end, if change user/object/startdate/enddate, "Run Report" button is shown but disabled. Should enable it.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
Fix the display issues of Chinese version XenCenter/WLB:
When WLB Configuration Dialog size is changing,
1. OK and Cancel buttons are truncated,
2. OK and Cancel buttons do not keep at the bottom/right corner of the dialog.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
Fix the display issues when WLB Configuration Dialog size is changing:
1. OK and Cancel buttons are truncated.
2. OK and Cancel buttons do not keep at the bottom/right corner of the dialog.
3. The height of the SplitContainer does not track the change of the height of the dialog.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
The reason for the error dialog appearing behind License Manager dialog was that we used MainWindow as parent of the Licensing Error dialog (in ShowLicensingFailureDialog method in ApplyLicenseEditionCommand)
and there were already 3 other modal dialogs displayed one on top of each other: License Manager, Apply License and Action Progress.
Fixed by calling the ShowLicensingFailureDialog from the command, on action.Completed event (instead of action.Run) and passing the Parent as a parameter, so that we can use the correct parent when displaying the error dialog.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
For pool audit trail report, when click "Run Report",
reset "_endTime" so that the end time will be re-retrieved.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
- Show the page and grey out the irrelevant options (i.e. the installation media if the template has no CD drive).
- Only disable the Installation media step if the template has no installation media and we don't show the boot options (because is HVM).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Updates view: on pressing Download and Install, open the wizard at "Servers" page, select all the servers that the patch applies to, and disable all the others.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Modified layout to avoid overlapping and dynamic movement of input fields/buttons when an error message is being displayed.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Reverted changes of CA-109242 (PR-62 on GitHub)
-Network tab: now to show '<None>' instead of '-' as Link Status (for pools: when the network has no PIFs; for hosts: when the network has no PIF )
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- In the Events view, offer a choice only to dismiss the visible ones instead of all
- Keep the filter buttons always enabled. This applies to all Notification views (Alerts, Updates & Events)
- Also refined the confirmation messages displayed when dismissing events
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Fixed by removing all the (redundant) tooltips from all the buttons in Alerts, Updates, Events view.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Fixed by removing all the (redundant) tooltips from all the buttons in Alerts, Updates, Events view.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Enhance WLB pool audit trail report:
1). Update advance settings to control audit trail granularity.
2). Update pool audit trail report to add user and object lists for selection.
3). Display large pool audit trail report with sections.
4). Localization for Chinese version.
5). Compatibility with WLB 6.5 and 6.1 or before.
Signed-off-by: Hui Zhang <hui.zhang@citrix.com>
Changes to the DeleteAllAlertsAction:
- when the dismiss operation fails with INVALID_HANDLE we need to remove the alert from our alert list (XenCenterAlerts) and trigger the CollectionChanged event so that the alert count gets updated.
- the action title now says "Removing <n> alerts" when dismissing all/selected alerts and "Removing alert" when dismissing single alert (instead of "Removing all alerts" in all cases)
- move the initialization of Dismissing flag outside the action (see below)
This fix also includes changes so that the Dismissing flag works as intended: to be able to hide the dismissing alerts in the Alerts view immediately, rather than one by one when they were actually deleted, causing a large number of refreshes.
On dismissing alerts we do:
1. set dismissing to true for all alerts
2. rebuild alert list (this will filter out the dismissing alerts)
3. dismiss alerts - run the DismissAllAlerts action
Also, the action buttons on each row should only apply to the clicked row (not multiselect).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The problem was the Summary page was displayed before the lists of succeeded and failed actions have been populated (on the Completed event of each action).
- To fix it, we populate these lists after all the actions are completed, and on the event thread.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- cannot remove completely because of the plugin specification, but it is not be visible even if they were plugins trying to use it
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Set the pool details in the action to allow proper filtering by location on the Events page
- Also, when possible, set the Host property: when setting the SR in the action, we also set the Host to SR.Home
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Suppress reporting of success and failure for sub-actions:
The suppress history flag is set when the action is created and if is false (by default) the action is added to the history (the Events list).
In order to suppress history for the subactions, we need change all actions used in Edit pages so their constructor can set the SuppressHistory flag and then use these constructors with suppressHistory = true on all the implementations of IEditPage.SaveSettings() where an action is created
(then we need to remember to do the same everytime we introduce a new page and / or "save" action).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-According to the call stack this is the place where the exception can come. Although I was not able to reproduce the exception, this fix solves a possible argument (index) out of range exception. With this check, point merging is not going to be done if it would be unnecessary anyway when there were an empty list to be merged (count==0).
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
-Fixed Home server's commands to try to use both versions of migration when deciding to enable or disable the menu item
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Added three Warning classes (HAEnabledWarning, WLBEnabledWarning, HostNotLiveWarning), used in the Pre-checks page of the Install wizard (also in the Rolling Pool Upgrade wizard) to indicate that a check was skipped and the reason why.
- If HA or WLB is on, we show this as an error in the "HA and WLB status" check and the "VM migration status" checks will be skipped (with a warning displayed) for all the hosts in the pool.
- Similarly, if a host if unreachable, we show this as an error in the "Host liveness status" check and the following checks for that host will be skipped (and warning displayed).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Make "Reclaim freed space" a CommandButton (will appear as disabled if the command cannot execute)
- Add tooltip to "Reclaim freed space" button to show the reason it is disabled
- Hide "Reclaim freed space" button on old servers
- Allow multiselect
- "Reclaim freed space" button enabled if at least one SR can be trimmed
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Register a PIF CollectionChanged event, so the page is refreshed when a bond is added / deleted.
- Register the PIF PropertyChanged event to each PIF when the grid is populated; this ensures that all the PIFs displayed will be refreshed when their properties change.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
This fixes the following problem:
When the main window is resized, we set the minimum width of the right side panel (Panel2MinSize) to half the size of the window so that the tab contents are visible. This is fine on most situations, but on a higher screen resolution (e.g. 1920x1080) the following problem occurs:
- starting with the main window at minimum size, when the window is maximized, the Panel2MinSize is set to half window's size (e.g. 960)
- when the main window is restored back to the minimum size, the split container is not resized because there is a conflict between Panel2MinSize and the size of the window itself (Panel1MinSize + Panel2MinSize > window's width)
- therefore the navigation panel is not visible and also the content of the tab control may appear out of scale.
To fix this, we set the Panel2MinSize to half of the window's minimum width. This way the right side panel will always fit in the window, including when it is restored to minimum size.
This also fixes [CA-137956] - Restoring Maximised XenCenter does not resize the main panel properly.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When the navigation panel is resized, we need to preserve the height of the bottom panel, by recalculating the splitter distance.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added a 'refresh grid' parameter to UpdateRow() which indicates if a sort and refresh of the grid is necessary.
- A sort and refresh is not needed when the user selects a server by pressing the space key or by mouse, but it is needed when the information displayed has changed, for example when the license has changed.
- Also solved a possible null reference exception in CheckableDataGridViewController.ReplaceStoredRow(), by returning -1 if the index is not within the rows range.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Force an update of the selected tab when switching back from Notification view, as some tabs ignore the update events when not visible (e.g. Snapshots, HA)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When clicking the action button on the grid, execute the action on the item that has been clicked, instead on using the grid's selected item, which may have not been updated yet.
- On multiselect (if the multiselect is allowed for the action), if the clicked item is in the grid's selection list, then execute the action on the whole list, otherwise on the clicked item only.
- This applies to both Updates and Alerts windows.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The error has been caused by the shadow multiplier field on Advanced Settings page: XenCenter thinks that the values has changed, and tries to save it, but this is not allowed for VM Admin users.
The solution is:
- use -1 as the signal value for unparseable string, instead of 1.0, which is actually a valid value;
- display the existing value without formatting it to 2 deciaml places;
Also corrected the validation function, as the shadow multiplier has to be greater than or equal to 1, not 0.1.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added check for null for sm.features in SR.SupportsTrim;
- Better error messages;
- Moved error messages from Messages to FriendlyNames;
- Removed the check for actions in progress from TrimSRCommand.CanExecute().
-
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The operation applies to an SR. The button is on the Storage tab of the host/pool, and is entitled "Reclaim freed space".
It comes between the New SR and Properties buttons.
If the SR does not support TRIM , the button is invisible and the Properties button moves left to close up the gap.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Reverted "CP-4951: CAR-100: Remove Rdp2 console" because Rdpclient 6.0 is not included in Windows Server 2003 SP2;
- Redone the fix for CA-123779 (Unhandled exception in Console Tab View), by moving RDPSetSettings() call inside a try..catch block, so we handle any exception thrown while setting the rdp client properties.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- XS60E009 has been replaced by XS62E006 and that the latter applies to all 6.x releases;
- 5.x hotfixes have changed, even though the version numbers are unchanged.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Renamed “Checking can evacuate host status” precheck group to “Checking VM migration status”
- Prechecks page – check that all VMs have valid vCPU settings (i.e. number of vCPUs is a multiple of number of cores per socket).
- This check is included in the ‘Checking VM migration status” group
- If a VM has invalid vCPU settings, the precheck will display the problem with a solution to “Fix vCPU configuration” which opens the VM Properties dialog on the CPU page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Text on CPU page - changed to include topology.
- Summary page on the New VM Wizard – changed to include topology
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Added Topology drop-down box with available values for sockets and cores per socket, so that the number of vCPUs is divisible by the number of cores per socket.
E.g. if user specified 8 vCPUs, Cores per socket can only be 1, 2, 4, or 8.
- This updates VM's platform:cores-per-socket property.
- Can only be set when the VM is shut down (similar to number of vCPUs).
- Text on CPU page - changed to include topology.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
When running XenCenter after a new installation, and the program's hash has changed (e.g. by .NET 4.0 upgrade), the previous settings are not automatically restored because they cannot be found (they are there, but in different folder).
We need to try and locate a config file from a previous installation, and if found, update the settings from there.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Made the radio button invisible for Creedence or higher XS hosts.
Removed previous StorageLink-related upgrade pre-checks and added (strict) check to prevent upgrade when StorageLink is used.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- The VLAN can be set to 0 only for Creedence or greater hosts on the vSwitch backend.
- When VLAN 0 is selected, an info is shown next to the control, saying "VLAN 0 will receive all traffic not on any other VLAN"
- Also fixed an error on New Network Wizard, where the "VLAN in use" message was still visible when changing the NIC.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Renamed "Delete Pool" to "Make into standlone server"
Made sure it can never work with a multi-server pool
Removed confirmation dialog, as it is not destructive
Removed from context menu, as it is not important/common enough
existing or due to the host being a slave. Use the action description instead of
the action title to construct the error for failed connection results. Indentation.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
If errors are found the error info at the bottom of the page shows up, however this should not happen while still checking and before any errors have been found.
Same applies for Prechecks page of Install Update Wizard.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
of XenCenter and tasks started from outside and cancelling the former when exiting
or disconnecting from the pool.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
On the affinity picker, the "no home server" radio button is disabled if there is no shared storage, except on editing an existing VM that already has no affinity.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Moved RDPSetSettings inside try..catch block, so we handle any exception thrown while setting the rdp client properties.
Also did some refactoring, removing redundant variable rdpClient6.
was available for non-dismissible alerts. Fixed wrong enabled state of the top
ToolStripSplitbutton Dismiss on the alerts and the events page. Refactored code
calculating dismissability of alerts and dismissing them. Events list should be
multi-selectable.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
is downloaded and stored every time an update is performed (if manual all updates
are downloaded, if automatic only as per the user's choices). If there are available
updates, update alerts are generated if there are connected hosts and disappear
when the hosts are disconnected.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
version alert from connections rather than ConnectionsManager.XenConnectionsCopy
(in accordance to dismissal of patch alerts).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
it was only used when logging and only for the updates; using the Description in
its place should be adequate. Fixed bug in the formatting of XenCenterUpdateAlert.Description
and removed duplicate logging when dismissing an alert.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
confusion (patch alerts and version alerts are both considered as server update alerts).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Performance issue - reconstruct the plugin menu items only when the plugins are
loaded/refreshed instead of doing it every time the parent menu is clicked. Workflow
issue - the PluginManager.Enabled gets its value from the registry; we shouldn't
wait unitl the plugins are loaded to set it.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
common code to the base class BackgroundThreadBase; removed classes inheriting from
EventArgs; use Action/Action<T> delegates instead of EventHandler<T>.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Also GPU page on Pool properties dialogs should not be shown for non vGPU pools.
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1385743406 0
# Fri Nov 29 16:43:26 2013 +0000
# Node ID e28f9921a0a17efb1e3a8d185acf18b5b6e116b1
# Parent 59229250db34dd4cc1f34fbdab055467a1570f87
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
for the server, not the one for the secret pool
# HG changeset patch
# User Stephen Turner <stephen.turner@citrix.com>
# Date 1384881428 0
# Tue Nov 19 17:17:08 2013 +0000
# Node ID 030ebb6e2f6964a4dbf9d5602c69cb23fcc0cbdb
# Parent 370811ffe245c8ea57ebd6f406711f8e1fee5a05
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
no forms are open. Since there is no event notifying about the Application.OpenForms
changing, created a new base class for all XenCenter dialogs and wizards with a
static event to which the main windw can subscribe.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
applies to the latter. Converted methods from AlertSummaryPage to one Alert and
one String extension method so they can be used more widely. Code simplification
on the Updates page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
the events page. This renders the old custom history controls obsolete, hence
removed them. Moved ActionBase extension methods to XenAdmin.Core namespace.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
used to access the alerts list. The list itself should be private as there is a
risk to access it and forgetting to use the lock.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- create a copy of the DropDownItems collection and use this copy to iterate through items (on the background thread)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- before leaving each page of the wizard, check if all selected VMs are still available for migration
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
events. Fixed display issue when moving between the notifications and the other views.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Preserve last selected node when switching between views. Added labelling to the
unit tests run post-build. Minor tidy.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1384254998 0
# Tue Nov 12 11:16:38 2013 +0000
# Node ID 6b3fc3d7a54e58e92ecfe714d19c8dc26b7a0565
# Parent 2cc90cb50e7ff2566f9d0833ad17735922d3f0c9
- Only close the inactive VNC consoles (not RDP) after an interval
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1384179387 0
# Mon Nov 11 14:16:27 2013 +0000
# Node ID 4c0609731471aec95b153843469b00811c123c0b
# Parent 6e77f45144cb01c9eba99be74ad9ffd056eeb110
- show the message about connecting with RDP only if is pass-through
- changed the current message to say "pass-through GPU" instead of "dedicated GPU"
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Gabor Apati-Nagy <Gabor.Apati-Nagy@citrix.com>
# Date 1383736103 0
# Wed Nov 06 11:08:23 2013 +0000
# Node ID f79a41a7c73e5555143a1f5cdf7bd3e8f27a8fba
# Parent 04c02de675af090f3171b6fbf3b21b023c645c24
GPU page:
5. put GPU page back at server level
7. Move Edit button of "Placement policy" closer to text and make the box smaller and fixed
8. Put Placement policy box within the scroll bar
VM properties dialog / New VM wizard:
9. gpu types should be shown in order 2-4-8
10. show types that are not allowed as disabled items in the combobox (instead of not showing at all)
11. increase the height of combobox (max no of items) so that all items are seen without scroll
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
GPUs are available on the server.
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1382711930 -3600
# Fri Oct 25 15:38:50 2013 +0100
# Node ID 20d8cfbaca8448b7aac43cc3640d35f536789c47
# Parent addf480a5eeb1c2bfc1a2756fee55dfa966d1751
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
and preselected combobox item when the user first lands on the GpuEditPage.
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1382365049 -3600
# Mon Oct 21 15:17:29 2013 +0100
# Node ID addf480a5eeb1c2bfc1a2756fee55dfa966d1751
# Parent dc93a040fbe1e9ca80e39352dc776941fd4c7802
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1383126814 0
# Wed Oct 30 09:53:34 2013 +0000
# Node ID 8af833de348d090a0126ad2f922ba7679739b654
# Parent 35673b51503006bbbb1e6647b1e0eb1938bd72ef
- added Max displays and Video RAM
- videoRAM needs TO BE REPLACED with max_resolution when this becomes available in the API
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1383045574 0
# Tue Oct 29 11:19:34 2013 +0000
# Node ID 35673b51503006bbbb1e6647b1e0eb1938bd72ef
# Parent bb05d6e143d7199359da1f555250d3a4ee126a5c
Overview tab completely redesigned and shown only on pool and standalone hosts.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
sortable; substituted balloon warning with tooltip; moved privace statement link
to the bottom of the page; reordered select/clear all buttons.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
this by susbstituting the FlickerFreeListBox with a DataGridView, which also fixes
the selection bug, plus we don't have to do custom drawing or costly string
measurements. This change will also aid the fix of CA-20870.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
This fix corrects the following behaviour: when you have a VM with no affinity and you go into its Properties dialog,
XenCenter believes that a VM on a standalone host has to have that affinity, and greys out the "no affinity" radio button,
which has the effect of forcibly changing the affinity to the host, which a VM Admin is not allowed to do.
The correct behaviour is that if a VM already has no affinity, we don't grey out the radio button.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Console tab: When entering full screen mode, make sure the screen is assigned before attempting to display the connection name.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- The License Manager dialog is no longer shown when connecting to unlicensed Clearwater and later hosts; same rule applies for periodic checks;
- Minor refactoring: combined two functions that did the same thing (CheckActiveServerLicense and periodicCheck) into one.
icon. Moved class OrganizationalView from XenModel back to XenAdmin as it is more
relevant to the latter. Updated relevant tests. Some code tidy.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
a autowrap-on-resize radiobutton. Also, removed badly aligned label and appended
its text to the radiobutton text.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
can start typing immediately. Thus the watermark with the example text is lost,
but I restored in on the label under the textbox instead.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
padding and docking values to make things look right, increases the possibility
of future layout bugs, especially in non-EN laguages).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377081773 -3600
# Node ID 583abe3dc86764b07314ae86d4feb48a89c6a7e1
# Parent 170c7cbbbaefee729774ae21a3c417205708abee
CA-92911: Remove items from right click menu and add those necessary instead of
setting their Available property to true/false because we end up with a lot of
empty space on the drop down on non-EN versions.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377079306 -3600
# Node ID 170c7cbbbaefee729774ae21a3c417205708abee
# Parent 5bd4ebbd0553c160917192dd4546bb19a2a5a64d
CA-112226: Updated unit tests to reflect the changes in string measurement. Minor code tidy.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377019978 -3600
# Node ID 7674677d207c53d4a1207a88d0f1aa82c68b22fe
# Parent a1940814a129b5fd75703a5aa541783a73b7cca5
CA-112234: Layout corrections on the LicenseManager. Increased dialog height in
the SC version to avoid control overlappin on the Summary panel.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1377013845 -3600
# Node ID a47a556a4ebb1abda620cfe1d79bba4292eaff8f
# Parent cc0505085de1e5f19326e13d74ec5542ce006080
[CA-92517] , [CA-112376] & [CA-112387] : Fixed the truncation in the CustomTreeView control
caused by wrong font being used in the calculation of scrollbar width.
Added a call to recalculate scrollbox width after the font used for description is changed.
This fixes the truncation in the following dialogs: Move VM, Move Virtual Disk, New Pool, Server Status Report.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377011213 -3600
# Node ID a1940814a129b5fd75703a5aa541783a73b7cca5
# Parent 46350c8ef9df37a0c41d7a7245438948d261504b
No need to set UseCompatibleTextRendering to true.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377010165 -3600
# Node ID 46350c8ef9df37a0c41d7a7245438948d261504b
# Parent a1c6bcf2b4d3119cff54d87fb97bd2491c9d8f67
CA-112226: Ellipsization should use TextRenderer.MeasureText (GDI) rather than
Graphics.MeasureString (GDI+) since the controls use the default UseCompatibleTextRendering
value (false).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377007835 -3600
# Node ID a1c6bcf2b4d3119cff54d87fb97bd2491c9d8f67
# Parent 41c2dfb11187cbc91b4f874b1df8c06524aad3c7
CA-113310: Corrected string measurement which was causing truncation on SC and a
lot of white space on EN and JA versions.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1376923571 -3600
# Node ID d2220b2b5c232e6f070c02d82a9a6283595eebf0
# Parent 4ccecd98746c40c5b1850f28c3e557e803102939
CA-113230: Fixed issue where surrogate characters were not displayed properly on
the DeleteVM dialog (this was actually a microsoft bug). Also some refactoring and
button text improvement.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1376915592 -3600
# Node ID 4ccecd98746c40c5b1850f28c3e557e803102939
# Parent cc14bc84973e1dd7e07ee6d90a2bac2cdd7baf79
[CA-112396], [CA-112304], [CA-112241]: Increased the width of the middle column
of the ActionProgressDialog TableLayoutPanel by 40px to reduce occurrance of text
wrapping. Ellipsized pool name in the GetHeartbeatSRsAction.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1376062101 -3600
# Node ID e9a03389b4dfd447a4034b55d74827d30e3950be
# Parent d0a3fa6db59fcaea186f0909053866153d15d450
CA-112877: Set the description text of the transfer VM network page when the export/import
mode is set ratehr than when the page is populated to avoid refreshing issues. Also,
fixed string formatting issue which could potentially cause problems with the word
order in languages other than English.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1375792166 -3600
# Node ID 2f3f7203b7a8c8c8d470534c0cf6554b9bf75a39
# Parent 6c08708f799c879557426b1aba48063b7ee9f877
CA-112444: Removed the ability to have link areas in the label of the ThreeButton
dialog because it's not always working for languages other than English. It was
used only in one place anyway, therefore I provided a dedicated dialog.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
removed uninitialised streams which we were taking care to close. Solution-wide
style: use string.IsNullOrEmpty method instead of checking separately for null
and zero length.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
leftover from the time when the OVF wizards were a XenCenter plugin; the latter
was not printing output into the XenCenter.log file, thus causing us to miss info).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
is expanded. Removed the title "New Search" from the panel and added a "New Search"
button which blanks the search. Renamed the "Reset" button to "Default Search" as
it wasn't obvious what it was resetting to.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
selectable combobox items from the classes EnableableComboBox and ISODropDownBox
to a base class called NonSelectableComboBox.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Fixed some memory leaks in the wizard and dialog tests. Updated broken Searcher tests.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
text on the page button depending on the number (1 vs many) of the plugins available.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
the search mode has changed; the latter should not be accessible from outside the
class.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
the same code. Use a CommandToolStripItem to launch the BugToolWizard like we do
for other wizards. Added overload for the MainWindowCommandInterface.ShowForm
method which allows to pass arguments to a wizard constructor.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
- added code to deregister event handlers when the ISO drop down box is disposed; plus some code tidy-up
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
to export all or only the shown alerts (functionality similar to the DismissAll button).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
For the time being show all entries. New filtering according to the entry location
will be implemented in a future commit.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
succeeded, failed; cancelled at the moment counts as failed, we may need to distinguish
in future). As a consequence the filter checkboxes from the top of the Log tab
were removed and some temporary changes were made to the drawing of action rows
(the controls will change completely in a subsequent commit).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
NewAction to use the Action<ActionBase> delegate instead of EventHandler. Thus
there is no need to fire them with Empty or null EventArgs and on several occasions
we avoid casting objects in the event handlers.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
expiry dates that are more than 30 days apart (not ideal, but safest solution for
the case of a mixture of free and free but expiring soon hosts.)
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
pass in parameters when the event is fired. Moved QueryElement.Dispose method
from the Designer.cs to the main file (it needs visibility since it contains more
code than the autogenerated method).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
a Save button in the Searcher panel. Moved collapse Searcher panel functionality
from the SearchOptions dropdown menu to a Close button in the panel. Use new
Expanded property to query the state of the Searcher panel (instead of Visible).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1. Added additional check to DownloadAndInstall method in ManageUpdatesDialog.cs: will proceed to the prechecks page in the Install Update Wizard only when there are selected servers on the previous page.
2. Modified code to allow hotfix installation when the host is in maintenance mode; however the host cannot be upgraded when in maintenance mode.
3. Modified test to reflect changes described above.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Moved LMVoHBA related code from UpdateWizardContent() method to CanShowLVMoHBASummaryPage() method which is called from RunNextPagePrecheck() method now: the code prepares all lvmohbaSrDescriptors for each LUN selected by the user and executes RunFinalAction() method.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
New info dialog displayed when the user cancels the last page (Apply Upgrade page) of the Rolling Pool Upgrade wizard.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Moved Dispose(bool disposing) method to SrStoragePage.cs (from SrStoragePage.Designer.cs).
2. Added private bool disposed field as suggested in review #1998.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Changed definition of IsDetached property in SR.cs: SR is detached when it has no PBDs or when all its PBDs are unplugged.
2. Added bool HasPBDs property in SR.cs (replaced previous IsDetached property definition).
3. Reviewed all usages of sr.IsDetached property.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Added VDIsDataGridViewBuilder class which refreshes the data grid view with new data using background worker thread.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
- Changed the condition under which we show pool members as individual hosts in the License Manager dialog, from ALL to ANY,
meaning that if any of the pool members can be activated, then we split the pool.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The logic to determine which rows have to be added/updated/removed has been moved to a separate thread. This improved the performance as the UI thread is blocked only to refresh rows in the dataGridView.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
- split the pool members out when they're free, as the activation keys can only be applied to one XenServer host at a time
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Modified BuildList() method to remove and add dataGridViewRows only when needed (previously all rows were cleared and new rows were added every time BuildList method was executed).
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Added Summary page to the New SR Wizard for HBA SRs. This page will display how many SRs were created successfully and how many failed to create.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Added AugustaOrGreater method to Helpers class (which is preferred method over MethodExists to check if a xapi call is available on a server). Also removed MethodExists method.
2. Utilized AugustaOrGreater method in GetDRMissingSRs method in both VM and VM_appliance classes.
Make Resolve All button visible (the button and the "resolve all" logic existed already; the button's visibility was set to False).
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
in the General Tab.
When master and slave(s) are licensed with different editions, the pool
license edition is not the master's edition, but the lowest license in the
pool.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
been previously upgraded.
Introduced Host.LongProductVersion property which returns host's
product version and build number (e.g. 5.6.100.72258), or null if
product version can't be found. We use this property to check
if the master has been updraded and to decide which slaves need
to be upgraded or to skip hosts already upgraded.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1. Modified RunCheck method in AssertCanBeRecoveredCheck.cs to always take
into account SR passed in ErrorDescription.
2. Format Description in MissingMultipleFCSRsProblem.cs.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Clear All button disabled when no rows selected; Select All button
disabled when all rows selected.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Resized columns on the LOcate Mirrored SRs page in the DR Wizard.
2. Changed wording of DR_WIZARD_STORAGEPAGE_DESCRIPTION_FAILBACK and
DR_WIZARD_STORAGEPAGE_DESCRIPTION_FAILOVER messages.
