- display the Provisioning entries in the General Tab only for iSCSI and LVM SRs
- also changed the checks in the ConvertToThinSRCommand to use SR.IsThinProvisioned property instead of SR.Provisioning
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Removed PV_DRIVERS_NOT_INSTALLED=0 from the VirtualisationStatus [Flags]enum - 0 will mean the same (to avoid bugs with enum.HasFlag(0) is always true)
Extracted common code to VMLifeCycleCommand.GetCantExecuteNoToolsOrDriversReasonCore() method (instead of defining overridden GetCantExecuteReasonCore() method at this level, because not all child classes need this...)
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Extended the enum, aimed for minimal changes, also using Flags on the enum now
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Not applied updates do not appear anymore in the General Tab of a pool. (Related to CA-180577)
- If we apply a patch that was already applied (happens when we take a file from disk that is not in the updates list taken from the Citrix website -> no metadata), on cancel we are now removing the uploaded patch from the host.
- Memory Tab uses GB units for values greater or equal to 1 GB, otherwise show in MB;
- Search Tab displays values in GB or MB in the same as the Memory Tab (e.g. 512 MB of 1 GB, 256 MB of 512 MB, 2.5 GB of 16 GB).
- The shiny bar present in the Memory Tab and in Memory Settings dialog shows the scaling in the following way: If smaller than 1 GB, then show as before, else show only labels with values multiples of half a GB.
- The units used in Memory Setting Dialog are set depending on the static_max. If it is greater or equal to 1 GB, then the units are GB, else MB. The user does not have the possibility of changing them.
Improves the centering of the warning messages in the Updates Tab, making the picture align with the text.
Corrects bug related to the visibility of the warning about automatic checks for updates.
CA-157785: Hotfix wizard forgets which servers should be greyed out.
When clicking Download and Install update in the Updates Tab, instead of opening a new dialog, it opens the Updates Wizard on the Select Servers Page and download the file in the Upload Page.
Fixes issue regarding the upload of the update every time that the user gets to Upload Page. Now it only uploads it if it has not been uploaded before.
Fixes issue regarding the download of the update every time the user goes back to the Select Patch Page. If the user goes back, but does not change the choice of the update, the download will not be done again.
- Added "FCoE Capable" column, showing FCoE capability as Yes/No values in the NICs grid
- This column is only visible for Dundee or higher hosts
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Added this information on the VM's general tab, and it could be one of the following:
- Operating mode: Paravirtualized (PV)
- Operating mode: Fully virtualized (HVM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Fixed the bug by subscribing to events of all actions and not only to the
ones that are displayed in the grid.
Besides this, the visibility of the row is being used instead of removing and
re-adding rows on status changes.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
We observed that some threads can reach deadlock-ish state after they have Invoked into a control's UI thread. When it happens they are all in a waiting for join or in sleep state for very long time, although there should not be any deadlock situations.
It seems this has something to do with multiple parent controls and with which control we invoked on. This should not make a difference, because we have got one UI thread (for MainWindow) they should wait for, but we have seen it does.
The solution that fixed this issue was to invoke on the MainWindow instead of various controls (see a4fe507adf ).
This changeset is changing all our Invokes to invoke into MainWindow
instead of a control itself. (MainWindow's UI thread is the only UI thread
all Control is using in XenCenter)
This changeset should be in place until we have found the root cause or the exact reason for the above.
- Show ports as: Address: 0.0.0.0; Public port: 8088; Private port: 8088; Protocol: tcp (multiple lines if more than one set)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Implemented changes as follows (copied from ticket):
"I'd suggest the following use-ability/homogeneity fixes for the new container management tabs, if they are quick and easy:
Combine "Docker Version" and "Docker Information" on the VM-General-tab into "Container Management - Docker Status" with the following fields only:
API version
Version
Git Commit
Driver
Index Server Address
Execution Driver
IPv4 Forwarding
In the "Processes" tab, change the name from "Docker Processes" to "Container Processes"
In the "Details" tab, change the name from "Docker Detail" to "Container Details"
In the "Details" tab, drop the top level element "docker_inspect" (XML requires a single root-node, afaik the Windows form treenode does not), or alternatively open the root node by default and rename it to "Inspect Result"
In the "Details" tab, add the "Details"-headline in black on white - just like on the "Processes"-tab
Also, on the container's General tab, show Properties button disabled, instead on hiding it (to be consistent to other cases, e.g. disconnected servers)
"
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
- Disable the Refresh button while a refresh is in progress.
- Introduced ExecuteContainerPluginAction - an action that stores the container it was called for, so that on completion we can decide whether to update the view or not (if the container displayed has changed, then we shouldn't update the view with the results from a previously selected container).
These changes apply to container Processes and Details tabs.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- also made Refresh buttons the same size on Details and Processes page and changed Details tab caption from "Detail" to "Details"
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Show a “Read Caching” section on the General Tab of a VM when the VM is running on a Cream or greater host
- When the Read Caching is enabled, the “Read Caching” section will contain two entries: Status and Disks (list of disks with RC enabled)
- When the Read Caching is disabled, the “Read Caching” section will contain two entries: Status and Reason
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Instead of calling the plugin on the UI thread, we call it through an action that we execute asynchronously and on completion update the UI.
- Pause the refresh timer on leaving the page and resume it when entering the page again.
- We do this for both Processes and Details page.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Showing all detailed information from a docker_inspect call
- The information refresh/polls every 20s while it's open
- Button “Refresh” add, so user can refresh the result. Also shows time when the last refresh happens.
- Add TabPageDetails as value 9903 in HelpManager.resx
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
This fixes the following issue: when displaying the General tab of a container, the Properties button is hidden, but not made visible again when switching to another object type (e.g. VM)
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
1.Add ports and command in DockerContainer object
2.All labels in General box are internationalized.
3.Add UUID, command, ports in General box
4.Export DockerContainer in ICache
5.Modify tab title to "Container General Properties"
6.Remove properties button
Signed-off-by: Cheng Zhang <cheng.zhang@citrix.com>
The 'Updates' section on host's General tab displays which packs have been installed onto a host, including the version number
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the case that there are two hosts in a pool, one with GPU and one without, then the one without will display a text saying "There are no GPUs on this server".
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
New properties:
- Pool.HasGpu = Pool has at least one PGPU
- Pool.HasVGpu = Pool has at least one PGPU that HasVGpu
- PGPU.HasVGpu = PGPU has at least one supported_VGPU_type that is not pass-through
New or modified helper functions:
- Helpers.GpuCapability = GPU feature not restricted (by licensing) and Pool.HasGpu
- Helpers.VGpuCapability = vGPU feature not restricted (by licensing) and Pool.HasVGpu
- Helpers.ClearwaterSp1OrGreater = API version is 2.1 or greater
The GPU dialogs are displayed as follows:
- GPU page on VM properties dialog: Visible only if VM.CanHaveGpu and the GPU feature not restricted (by licensing)
- GPU page on New VM Wizard: Visible only if VM.CanHaveGpu and the pool has GPU capability (Helpers.GpuCapability)
- GPU page on Pool properties dialog: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- GPU tab: Visible only if the pool has GPU capability (Helpers.GpuCapability) and is Clearwater SP1 or greater
- On the GPU tab, the "Placement policy" panel: Visible only if the pool has vGPU capability (Helpers.VGpuCapability)
- On the GPU tab, the "Edit" button on the "vGPU types" panel: Visible only if the PGPU.HasVGpu and vGPU feature not restricted (by licensing)
Also:
- VM.CanHaveVGpu function renamed to CanHaveGpu
- On the GPU tab, renamed "Allowed vGPU types" to "vGPU types
The Free license never expires and is confusing to see "Unlicensed" or "Unsupported" hosts with expiry date "Never".
Added the ability to add "hidden" entries to the General tab sections and to update their visibility when needed without regenerating the whole section.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
Changes to the License Manager dialog:
- Summary panel: show smaller icons for warning and information messages
- Summary panel: show license entitlements for all Creedence hosts (not eligible for support, eligible for support, enterprise features enabled, etc)
- for free Creedence or Clearwater hosts, the license status is Free (it used to be Expired for ClearwaterOrGreater)
and the text displayed is "Unlicensed" for Creedence and "Unsupported" for Clearwater;
the warning message is "Not eligible for support" (instead of "Your support and maintenance has expired")
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
In some cases calling Control.Invoke() from a background thread causes that thread to go in a "sleep, wait, or join" mode, while waiting for Invoke to happen, although the UI thread is running normally.
If the Control is the MainWindow, it works as expected, but we've seen it happening while connecting or disconnecting from a large pool, on calling Invoke on controls like NavigationView, AlertSummaryPage, HistoryPage, etc.
To fix this, we call the Invoke on the MainWindow in all the places where we've seen the issue.
With this changes, the previous fix for CA-148245 (call RequestRefreshTreeView on CacheClearing event) is not needed anymore, so I removed that call.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Changed Location to Server or Server/Pool in the views contained by the Notifications View
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Updates view: on pressing Download and Install, open the wizard at "Servers" page, select all the servers that the patch applies to, and disable all the others.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- In the Events view, offer a choice only to dismiss the visible ones instead of all
- Keep the filter buttons always enabled. This applies to all Notification views (Alerts, Updates & Events)
- Also refined the confirmation messages displayed when dismissing events
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
-Fixed by removing all the (redundant) tooltips from all the buttons in Alerts, Updates, Events view.
Signed-off-by: Gabor Apati-Nagy <gabor.apati-nagy@citrix.com>
Changes to the DeleteAllAlertsAction:
- when the dismiss operation fails with INVALID_HANDLE we need to remove the alert from our alert list (XenCenterAlerts) and trigger the CollectionChanged event so that the alert count gets updated.
- the action title now says "Removing <n> alerts" when dismissing all/selected alerts and "Removing alert" when dismissing single alert (instead of "Removing all alerts" in all cases)
- move the initialization of Dismissing flag outside the action (see below)
This fix also includes changes so that the Dismissing flag works as intended: to be able to hide the dismissing alerts in the Alerts view immediately, rather than one by one when they were actually deleted, causing a large number of refreshes.
On dismissing alerts we do:
1. set dismissing to true for all alerts
2. rebuild alert list (this will filter out the dismissing alerts)
3. dismiss alerts - run the DismissAllAlerts action
Also, the action buttons on each row should only apply to the clicked row (not multiselect).
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Make "Reclaim freed space" a CommandButton (will appear as disabled if the command cannot execute)
- Add tooltip to "Reclaim freed space" button to show the reason it is disabled
- Hide "Reclaim freed space" button on old servers
- Allow multiselect
- "Reclaim freed space" button enabled if at least one SR can be trimmed
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- Register a PIF CollectionChanged event, so the page is refreshed when a bond is added / deleted.
- Register the PIF PropertyChanged event to each PIF when the grid is populated; this ensures that all the PIFs displayed will be refreshed when their properties change.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
- When clicking the action button on the grid, execute the action on the item that has been clicked, instead on using the grid's selected item, which may have not been updated yet.
- On multiselect (if the multiselect is allowed for the action), if the clicked item is in the grid's selection list, then execute the action on the whole list, otherwise on the clicked item only.
- This applies to both Updates and Alerts windows.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
The operation applies to an SR. The button is on the Storage tab of the host/pool, and is entitled "Reclaim freed space".
It comes between the New SR and Properties buttons.
If the SR does not support TRIM , the button is invisible and the Properties button moves left to close up the gap.
Signed-off-by: Mihaela Stoica <mihaela.stoica@citrix.com>
was available for non-dismissible alerts. Fixed wrong enabled state of the top
ToolStripSplitbutton Dismiss on the alerts and the events page. Refactored code
calculating dismissability of alerts and dismissing them. Events list should be
multi-selectable.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
applies to the latter. Converted methods from AlertSummaryPage to one Alert and
one String extension method so they can be used more widely. Code simplification
on the Updates page.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
the events page. This renders the old custom history controls obsolete, hence
removed them. Moved ActionBase extension methods to XenAdmin.Core namespace.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
used to access the alerts list. The list itself should be private as there is a
risk to access it and forgetting to use the lock.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
events. Fixed display issue when moving between the notifications and the other views.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Preserve last selected node when switching between views. Added labelling to the
unit tests run post-build. Minor tidy.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Gabor Apati-Nagy <Gabor.Apati-Nagy@citrix.com>
# Date 1383736103 0
# Wed Nov 06 11:08:23 2013 +0000
# Node ID f79a41a7c73e5555143a1f5cdf7bd3e8f27a8fba
# Parent 04c02de675af090f3171b6fbf3b21b023c645c24
GPU page:
5. put GPU page back at server level
7. Move Edit button of "Placement policy" closer to text and make the box smaller and fixed
8. Put Placement policy box within the scroll bar
VM properties dialog / New VM wizard:
9. gpu types should be shown in order 2-4-8
10. show types that are not allowed as disabled items in the combobox (instead of not showing at all)
11. increase the height of combobox (max no of items) so that all items are seen without scroll
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Mihaela Stoica <Mihaela.Stoica@citrix.com>
# Date 1383045574 0
# Tue Oct 29 11:19:34 2013 +0000
# Node ID 35673b51503006bbbb1e6647b1e0eb1938bd72ef
# Parent bb05d6e143d7199359da1f555250d3a4ee126a5c
Overview tab completely redesigned and shown only on pool and standalone hosts.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
# HG changeset patch
# User Konstantina Chremmou <Konstantina.Chremmou@citrix.com>
# Date 1377081773 -3600
# Node ID 583abe3dc86764b07314ae86d4feb48a89c6a7e1
# Parent 170c7cbbbaefee729774ae21a3c417205708abee
CA-92911: Remove items from right click menu and add those necessary instead of
setting their Available property to true/false because we end up with a lot of
empty space on the drop down on non-EN versions.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
is expanded. Removed the title "New Search" from the panel and added a "New Search"
button which blanks the search. Renamed the "Reset" button to "Default Search" as
it wasn't obvious what it was resetting to.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
Fixed some memory leaks in the wizard and dialog tests. Updated broken Searcher tests.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
For the time being show all entries. New filtering according to the entry location
will be implemented in a future commit.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
succeeded, failed; cancelled at the moment counts as failed, we may need to distinguish
in future). As a consequence the filter checkboxes from the top of the Log tab
were removed and some temporary changes were made to the drawing of action rows
(the controls will change completely in a subsequent commit).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
NewAction to use the Action<ActionBase> delegate instead of EventHandler. Thus
there is no need to fire them with Empty or null EventArgs and on several occasions
we avoid casting objects in the event handlers.
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
pass in parameters when the event is fired. Moved QueryElement.Dispose method
from the Designer.cs to the main file (it needs visibility since it contains more
code than the autogenerated method).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
a Save button in the Searcher panel. Moved collapse Searcher panel functionality
from the SearchOptions dropdown menu to a Close button in the panel. Use new
Expanded property to query the state of the Searcher panel (instead of Visible).
Signed-off-by: Konstantina Chremmou <konstantina.chremmou@citrix.com>
1. Moved Dispose(bool disposing) method to SrStoragePage.cs (from SrStoragePage.Designer.cs).
2. Added private bool disposed field as suggested in review #1998.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
1. Changed definition of IsDetached property in SR.cs: SR is detached when it has no PBDs or when all its PBDs are unplugged.
2. Added bool HasPBDs property in SR.cs (replaced previous IsDetached property definition).
3. Reviewed all usages of sr.IsDetached property.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Added VDIsDataGridViewBuilder class which refreshes the data grid view with new data using background worker thread.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
The logic to determine which rows have to be added/updated/removed has been moved to a separate thread. This improved the performance as the UI thread is blocked only to refresh rows in the dataGridView.
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
Modified BuildList() method to remove and add dataGridViewRows only when needed (previously all rows were cleared and new rows were added every time BuildList method was executed).
Signed-off-by: Adrian Jachacy <Adrian.Jachacy@citrix.com>
